|
|
PDF EMD4DXV6T5 Data sheet ( Hoja de datos )
| Número de pieza | EMD4DXV6T5 | |
| Descripción | (EMD4DXV6T1 / EMD4DXV6T5) Dual Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EMD4DXV6T5 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
EMD4DXV6T1,
EMD4DXV6T5
Preferred Devices
Dual Bias Resistor
Transistors
NPN and PNP Silicon Surface Mount
Transistors with Monolithic Bias
Resistor Network
The BRT (Bias Resistor Transistor) contains a single transistor with
a monolithic bias network consisting of two resistors; a series base
resistor and a base−emitter resistor. These digital transistors are
designed to replace a single device and its external resistor bias
network. The BRT eliminates these individual components by
integrating them into a single device. In the EMD4DXV6T1 series,
two complementary BRT devices are housed in the SOT−563 package
which is ideal for low power surface mount applications where board
space is at a premium.
Features
• Simplifies Circuit Design
• Reduces Board Space
• Reduces Component Count
• These are Pb−Free Devices
MAXIMUM RATINGS (TA = 25°C unless otherwise noted, common for Q1
and Q2, − minus sign for Q1 (PNP) omitted)
Rating
Symbol
Value
Unit
Collector-Base Voltage
VCBO 50 Vdc
Collector-Emitter Voltage
VCEO 50 Vdc
Collector Current
IC 100 mAdc
THERMAL CHARACTERISTICS
Characteristic
(One Junction Heated)
Symbol
Max
Unit
Total Device Dissipation
TA = 25°C (Note 1)
Derate above 25°C (Note 1)
PD 357 mW
2.9 mW/°C
Thermal Resistance,
Junction-to-Ambient (Note 1)
RqJA
350 °C/W
Total Device Dissipation
TA = 25°C (Note 1)
Derate above 25°C
PD 500 mW
4.0 mW/°C
Thermal Resistance,
Junction-to-Ambient (Note 1)
RqJA
250 °C/W
Junction and Storage Temperature
TJ, Tstg −55 to +150 °C
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. FR−4 board with minimum mounting pad.
© Semiconductor Components Industries, LLC, 2005
October, 2005− Rev. 1
1
http://onsemi.com
(3) (2) (1)
R1 R2
Q1
R2 R1
Q2
(4) (5)
(6)
6
1
SOT−563
CASE 463A
STYLE 1
MARKING DIAGRAM
U7 M G
G
1
U7 = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping†
EMD4DXV6T1G SOT−563 4000/Tape & Reel
(Pb−Free)
EMD4DXV6T5G SOT−563 8000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
EMD4DXV6/D
1 page  
EMD4DXV6T1, EMD4DXV6T5
PACKAGE DIMENSIONS
SOT−563, 6 LEAD
CASE 463A−01
ISSUE F
D
−X−
A
L
654
12 3
E
−Y−
HE
b 65 PL
e 0.08 (0.003) M X Y
C
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETERS
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD
FINISH THICKNESS. MINIMUM LEAD THICKNESS
IS THE MINIMUM THICKNESS OF BASE MATERIAL.
MILLIMETERS
DIM MIN NOM MAX
A 0.50 0.55 0.60
b 0.17 0.22 0.27
C 0.08 0.12 0.18
D 1.50 1.60 1.70
E 1.10 1.20 1.30
e 0.5 BSC
L 0.10 0.20 0.30
HE 1.50 1.60 1.70
STYLE 1:
PIN 1. EMITTER 1
2. BASE 1
3. COLLECTOR 2
4. EMITTER 2
5. BASE 2
6. COLLECTOR 1
INCHES
MIN NOM MAX
0.020 0.021 0.023
0.007 0.009 0.011
0.003 0.005 0.007
0.059 0.062 0.066
0.043 0.047 0.051
0.02 BSC
0.004 0.008 0.012
0.059 0.062 0.066
SOLDERING FOOTPRINT*
0.3
0.0118
1.35
0.0531
1.0
0.0394
0.45
0.0177
0.5 0.5
0.0197 0.0197
ǒ ǓSCALE 20:1
mm
inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
5
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
EMD4DXV6/D
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet EMD4DXV6T5.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EMD4DXV6T1 | (EMD4DXV6T1 / EMD4DXV6T5) Dual Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors | ON Semiconductor |
| EMD4DXV6T5 | (EMD4DXV6T1 / EMD4DXV6T5) Dual Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors | ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |