|
|
PDF P1935 Data sheet ( Hoja de datos )
| Número de pieza | P1935 | |
| Descripción | Power Amplifier | |
| Fabricantes | PDI | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de P1935 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Product Specification
P1935
Power Amplifier 1880-1920 MHz, 35 dB min. Gain @ 1900 Hz @ 33.5 dBm Output
FEATURES
• 1.9 GHz Power Amplifier Module
• Typical 33.5 dBm output power
• Excellent adjacent leakage power
• Typical 35.7 dB power gain
• Low cost metal package
APPLICATION
• Final stage power amplifier of base station for PHS
DESCRIPTION
• The P1935 is a high performance 1.9 GHz band
power amplifier offering excellent linearity. The
device provides 33.5 dBm output power with a
typical 35.7 dB gain at 1.9 GHz. It is housed in a cost
effective metal package and operates from +10 V
and –5 V power supplies.
P1935
Power Amplifier
1880-1920 MHz
35 dB min. Gain @ 1900MHz
LIMITING VALUES
Notes: Operating the device above these parameters may cause permanent damage, Case Temperature Tc=25°C
SYMBOL
V1
V2
Pin
Tstg
Topt
PARAMETER
DC supply voltage
Input Power
Storage Temperature
Operating Temperature
MIN.
-
-
-
- 40
- 20
MAX.
12
-7
10
+ 95
+ 80
UNIT
V
V
dBm
°C
°C
CHARACTERISTICS
Table 1: Test condition 25°C
SYMBOL PARAMETER
CONDITIONS
f Frequency
Id Supply Current
Ga Power Gain
Input VSWR
2f0
3f0
Harmonic Distortion
Pout=33.5 dBm
V1= 10 V
V2= -5 V
Padj1
Padj2
Adjacent Channel
Leakage Power1)
± 600 kHz
± 900 kHz
Notes:1) RF signal modulation is per PHS RCR-28
MIN.
1880
-
35
-
-
-
-
-
TYP.
1200
35.7
1.5
-55
-55
-64
-71
MAX.
1920
1270
-
2.5
-40
-36
-61
-69
UNIT
MHz
mA
dB
-
dBc
dBc
dBc
dBc
Page 1 of 5
September 2006
Document Revision Level B
1 page  
Product Specification
P1935
Power Amplifier 1880-1920 MHz, 35 dB min. Gain @ 1900 Hz @ 33.5 dBm Output
DEFINITIONS
Data Sheet Status
Objective Product
Specification
Preliminary Product
Specification
Product Specification
This data sheet contains target or goal specifications for product
development.
This data sheet contains preliminary data; supplementary data may
be published later.
This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134).
Stress above one or more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any other conditions
above those given in the Characteristics sections of the specification is not implied. Exposure to
limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
Premier Devices reserves the right to make changes without further notice to any products herein.
Premier Devices makes no warranty representation or guarantee regarding the suitability of its products for any particular
purpose, nor does Premier Devices assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical”
parameters which may be provided in Premier Devices datasheets and/or specifications can and do vary in different
applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated
for each customer application by customer´s technical experts. Premier Devices does not convey any license under its
patent rights nor the rights of others. Premier Devices products are not designed, intended, or authorized for use as
components in systems intended for surgical implant into the body, or other applications intended to support or sustain
life, or for any other application in which the failure of the Premier Devices product could create a situation where personal
injury or death may occur. Should Buyer purchase or use Premier Devices products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Premier Devices and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, and claim of personal injury or death associated with such unintended or unauthorized
use, even if such claim alleges that Premier Devices was negligent regarding the design or manufacture of the part.
© Premier Devices Germany GmbH 2006
How to contact us:
Premier Devices Germany GmbH
Loeffelholzstrasse 20, D-90441 Nuernberg, Germany
Phone: +49 (0) 911 9411 233, FAX: +49 (0) 911 9411 198,
Page 5 of 5
September 2006
Document Revision Level B
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet P1935.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| P1935 | Power Amplifier | PDI |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |