|
|
Número de pieza | EMIF010-COM01F2 | |
Descripción | EMI FILTER INCLUDING ESD PROTECTION | |
Fabricantes | ST Microelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de EMIF010-COM01F2 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! www.DataSheet4U.com
®
IPAD™
EMIF10-COM01F2
EMI FILTER
INCLUDING ESD PROTECTION
MAIN PRODUCT CHARACTERISTICS
EMI filtering and ESD protection for:
■ Computers and printers
■ Communication systems
■ Mobile phones
DESCRIPTION
The EMIF10-COM01F2 is a highly integrated
device designed to suppress EMI / RFI noise in all
systems subjected to electromagnetic interfer-
ences. The EMIF10 Flip-Chip packaging means
the package size is equal to the die size.
Additionally, this filter includes an ESD protection
circuitry which prevents the protected device from
destruction when subjected to ESD surges up to
15 kV.
BENEFITS
■ EMI symmetrical (I/O) low-pass filter
■ Lead free package
■ Very low PCB space consuming: < 6mm2
■ Very thin package: 0.65 mm
■ High efficiency in ESD suppression on both
input & output pins
■ High reliability offered by monolithic integration
COMPLIES WITH THE FOLLOWING STANDARDS:
IEC61000-4-2 level 4
15kV (air discharge)
8kV (contact discharge)
Flip-Chip
(25 Bumps)
Table 1: Order Code
Part Number
EMIF010-COM01F2
Marking
FE
Figure 1: Pin Configuration (Ball side)
EDCBA
I5 I4 I3 I2 I1 1
I10 I9 I8 I7 I6 2
GND GND GND GND GND 3
010 09 08 07 06 4
05 04 03 02 01 5
Figure 2: Basic cell configuration
Input
Low-pass Filter
Output
TM: IPAD is a trademark of STMicroelectronics.
April 2005
REV. 2
RI/O = 200Ω
Cline = 45 pF
1/7
1 page www.DataSheet4U.com
EMIF10-COM01F2
Figure 10: Ordering Information Scheme
EMIF yy - xxx zz Fx
EMI Filter
Number of lines
Information
x = resistance value (Ohms)
z = capacitance value / 10(pF)
or
3 letters = application
2 digits = version
Package
F = Flip-Chip
x = 1: 500µm, Bump = 315µm
= 2: Leadfree Pitch = 500µm, Bump = 315µm
= 3: Leadfree Pitch = 400µm, Bump = 250µm
Figure 11: FLIP-CHIP Package Mechanical Data
500µm ± 50
315µm ± 50
650µm ± 65
2.42mm ± 50µm
Figure 12: Foot print recommendations
Copper pad Diameter :
250µm recommended , 300µm max
Solder stencil opening : 330µm
Solder mask opening recommendation :
340µm min for 315µm copper pad diameter
Figure 13: Marking
Dot, ST logo
xx = marking
z = packaging location
yww = datecode
(y = year
ww = week)
All dimensions in µm
545 400
E
xxz
y ww
5/7
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet EMIF010-COM01F2.PDF ] |
Número de pieza | Descripción | Fabricantes |
EMIF010-COM01F2 | EMI FILTER INCLUDING ESD PROTECTION | ST Microelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |