|
|
Teilenummer | PE4246 |
|
Beschreibung | Absorptive SPST UltraCMOS RF Switch | |
Hersteller | Peregrine Semiconductor | |
Logo | ||
Gesamt 8 Seiten www.DataSheet4U.com
Product Description
The PE4246 RF Switch is designed to cover a broad range of
applications from DC to 5000 MHz. It is non-reflective at both
RF1 and RF2 ports. This SPST switch integrates a single-pin
CMOS control interface, and provides low insertion loss while
operating with extremely low bias from a single +3-volt supply.
In a typical application, the high isolation PE4246 can replace
multiple RF switches of lesser isolation performance. It is
offered in a small 3x3 mm DFN package.
The PE4246 is manufactured on Peregrine’s UltraCMOS™
process, a patented variation of silicon-on-insulator (SOI)
technology on a sapphire substrate, offering the performance
of GaAs with the economy and integration of conventional
CMOS.
Figure 1. Functional Diagram
RF1 RF2
Product Specification
PE4246
Absorptive SPST UltraCMOS™
RF Switch: DC - 5000 MHz
Features
• Non-reflective 50-ohm RF switch
• 50-ohm (0.25 watt) terminations
• High isolation: 55 dB at 1000 MHz,
48 dB at 3000 MHz
• Low insertion loss: 0.8 dB at 1000 MHz,
0.9 dB at 3000 MHz
• High linearity: +33 dBm input 1dB
compression point
• CMOS/TTL single-pin control
• Single +3-volt supply operation
• Extremely low bias: 33 µA @ 3 V
• Available in a 6-lead DFN package
Figure 2. Package Type
6-lead DFN
50 CMOS 50
Control
Driver
CTRL
Table 1. Electrical Specifications @ +25 °C, VDD = 3 V (ZS = ZL = 50 Ω)
Parameter
Operation Frequency1
Operating Power
Insertion Loss
Isolation
Return Loss
Input 1 dB Compression3
Input IP3
Video Feedthrough2
Switching Time
Condition
CTRL=1/CTRL=0
DC-2000 MHz
2000-3000 MHz
3000-4000 MHz
4000-5000 MHz
DC-2000 MHz
2000-3000 MHz
3000-4000 MHz
4000-5000 MHz
DC-5000 MHz
DC-5000 MHz
DC-5000 MHz
Minimum
DC
49
45
43
40
11
30
50
Typical
0.8
0.9
1.0
1.3
55
48
46
44
20
33
2
Maximum
5000
30/24
1.0
1.1
1.3
1.8
15
Units
MHz
dBm
dB
dB
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
mVpp
µs
Notes: 1. Device linearity will begin to degrade below 1 MHz.
2. The DC transient at the output of the switch when the control voltage is switched from Low to High or High to Low in a 50 Ω test set-up,
measured with 1ns risetime pulses and 500 MHz bandwidth.
3. Note Absolute Maximum ratings in Table 3.
Document No. 70-0090-05 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 8
PE4246
Product Specification
Figure 13. Package Drawing
6-lead DFN
0.125
3.00
6 5 CL 4
CL
PIN
M1AR
K
4 0.10 C
123
0.10 C
4
-A-
-B-
3.00
0.125
0.100 C
10°+-120°°
0.080 C
3
0.90 ±0.10
0.025±0.025
TOP
VIEW
SIDE
VIEW
SEE DETAIL B
DETAIL C
0.70 ± 0.05
0.20 ±0.05
SEATING
PLANE
-C-
0.025
±0.025
DETAIL B
EXPOSED PAD
SEE DETAIL A
EXPOSED
(2X)
CL
0.95
12
3
R 0.15 TYP
0.35
+0.08
-0.02
0.10
0.05 C
CAB
0.29
+0.21
-0.08
R0.127 TYP
0.605 ±0.05
1.21 ±0.10
6 54
3 .20 MIN.
1.05±0.05
2.01±0.10
EXPOSED SLUG/
HEAT SINK
THIS FEATURE
APPLIES TO
BOTH ENDS OF
THE PKG.
BOTTOM VIEW
1. DIMENSIONS AND TOLERANCES ARE PER ANSi Y14.5
2. DIMENSIONS ARE IN MILLIMETERS, ANGLES ARE IN DEGREES.
3 COPLANARITY APPLIES TO EXPOSED HEAT SLUG AS WELL AS THE TERMINALS.
4 PROFILE TOLERANCE APPLIES TO PLASTIC BODY ONLY.
0.17 MIN.
0.24
+0.20
-0.08
0.125
0.17
0.30
DETAIL A
EXPOSED METALIZED
FEATURE
EDGE OF PLASTIC BODY
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 6 of 8
Document No. 70-0090-05 │ UltraCMOS™ RFIC Solutions
6 Page | ||
Seiten | Gesamt 8 Seiten | |
PDF Download | [ PE4246 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
PE4240 | SPST UltraCMOS CATV Switch DC | Peregrine Semiconductor |
PE4241 | SPDT UltraCMOS RF Switch | Peregrine Semiconductor |
PE4242 | SPDT UltraCMOS RF Switch | Peregrine Semiconductor |
PE42421 | RF Switch | Peregrine Semiconductor |
PE42422 | SPDT RF Switch | Peregrine Semiconductor |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |