|
|
Teilenummer | W536120T |
|
Beschreibung | (W536xx0T) VOICE/MELODY/LCD CONTROLLER | |
Hersteller | Winbond | |
Logo | ||
Gesamt 16 Seiten www.DataSheet4U.com
W536030T/060T/090T/120T
VOICE/MELODY/LCD CONTROLLER
(ViewTalk TM Series)
Table of Contents-
1. GENERAL DESCRIPTION ......................................................................................................... 2
2. FEATURES ................................................................................................................................. 3
3. BLOCK DIAGRAM ...................................................................................................................... 5
4. PAD DESCRIPTION ................................................................................................................... 6
5. ELECTRICAL CHARACTERISTICS........................................................................................... 9
5.1 Absolute Maximum Ratings............................................................................................... 9
5.2 DC Characteristics............................................................................................................. 9
5.3 AC Characteristics ........................................................................................................... 11
6. TYPICAL APPLICATION CIRCUITS ........................................................................................ 14
6.1 Sub Clock with RC Mode................................................................................................. 14
6.2 Sub Clock with Crystal Mode........................................................................................... 15
7. REVISION HISTORY ................................................................................................................ 16
Publication Release Date: May 21, 2003
- 1 - Revision A8
W536030T/060T/090T/120T
4. PAD DESCRIPTION
SYMBOL
I/O
FUNCTION
XIN/RXIN
Input pad for main clock oscillator. It can be connected to crystal when
crystal mode is selected (SCR0.2 = 1), otherwise connect a resistor to
I
VDD to generate main system clock while Ring mode is selected
(SCR0.2 = 0 and default). Oscillator can be enabled or stopped by set
SCR0.1 to 1 or clear to 0 separately. External capacitor connects to
start oscillation and get more accurate clock when crystal mode
XOUT
Output pad for oscillator which is connected to another crystal pad
O when in crystal mode. External capacitor connects to start oscillation
when in crystal mode.
X32I/RSUB1
32.768 KHz crystal input pad or external resistor node 1 by mask
I option. External 15~20pF capacitor connects to start oscillation and
get more accurate clock when in crystal mode.
X32O/RSUB2
32.768 KHz crystal output pad or external resistor node 2 by mask
O option. External 15~20pF capacitor connects to start oscillation when
in crystal mode.
General Input/Output port specified by PM1 register. If output mode is
RA0 ~ RA3/TONE
(8)
I/O
selected, PM0 register bit 0 can be used to specify CMOS/NMOS
driving capability option. Initial state is input mode. RA3 may be uses
as TONE if bit 0 of MR0 special register is set to logic 1. An interrupt
source.
RB0 ~ RB3
(8)
General Input/Output port specified by PM2 register. If output mode is
I/O
selected, PM0 register bit 1 can be used to specify CMOS/NMOS
driving capability option. Initial state is input mode (W536090T
/W536120T only.)
RC0 ~ RC3
4-bit schmitter input with internal pull high option specified by PM3
register bit 2. Each pad has an independent interrupt capability
I specified by PEFL special register. Interrupt and STOP mode wake up
source. RC0 is also the external event counter source of Timer1.
(W536060T/090T/120T only.)
RD0
RD1/CLK
RD2/DATA
RD3/ADDR
(4)
4-bit schmitter input port with internal pull high option specified by PM3
register bit 3. Each pad has an independent interrupt capability
I
specified by PEFH special register. Interrupt and STOP mode wake up
source. RD1~3 will be shared as the external memory W55XXX
interface pads while RD port shared as serial bus mask option is
enabled @W536030T/060T.
RE0~RE3
(8)
O
Output port only. PM3 register bit 0 can be used to specify
CMOS/NMOS driving capability option. (W536090T/120T only)
RF0~RF3
(8)
O
Output port only. PM3 register bit 1 can be used to specify
CMOS/NMOS driving capability option. (W536090T/120T only)
RES I System reset pad, active low with internal pull-high resistor.
-6-
6 Page W536030T/060T/090T/120T
Iop Vs. Main clock RC mode
1000
800
600
400
Iop (uA)
200
0
1
23
Freq (MhZ)
4
3V
4.5V
Oscillation Freq Vs. Sub-Clock
44
40
36
Fsub (KhZ) 32
28
24
20
560 620 680 750 820 1K
Rsub (Kohm)
3V
4.5V
- 12 -
12 Page | ||
Seiten | Gesamt 16 Seiten | |
PDF Download | [ W536120T Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
W536120A | (W536xx0A) VOICE/ MELODY / LCD CONTROLLER | Winbond |
W536120K | (W536xx0K) VOICE/MELODY/LCD CONTROLLER | Winbond |
W536120P | (W536xx0P) VOICE & MELODY CONTROLLER | Winbond |
W536120T | (W536xx0T) VOICE/MELODY/LCD CONTROLLER | Winbond |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |