|
|
PDF AP502 Data sheet ( Hoja de datos )
| Número de pieza | AP502 | |
| Descripción | UMTS-band 4W HBT Amplifier Module | |
| Fabricantes | WJ Communication | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AP502 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
AP502
UMTS-band 4W HBT Amplifier Module
The Communications Edge TM
Product Information
Product Features
Product Description
Functional Diagram
• 2110 – 2170 MHz
• 30 dB Gain
• +36 dBm P1dB
• -55 dBc ACLR
@ 25 dBm wCDMA linear power
• +12 V Single Supply
• Power Down Mode
• Bias Current Adjustable
• RoHS-compliant flange-mount pkg
Applications
• Final stage amplifiers for repeaters
• Optimized for driver amplifier
PA mobile infrastructure
The AP502 is a high dynamic range power amplifier in a
RoHS-compliant flange-mount package. The multi-stage
amplifier module has 30 dB gain, while being able to achieve
high performance for PCS-band applications with +36 dBm
of compressed 1dB power. The module has been internally
optimized for driver applications provide -55 dBc ACLR at
25 for wCDMA applications. The module can be biased
down for current when higher efficiency is required.
The AP502 uses a high reliability InGaP/GaAs HBT process
technology and does not require any external matching
components. The module operates off a +12V supply and
does not requiring any negative biasing voltages; an internal
active bias allows the amplifier to maintain high linearity
over temperature. It has the added feature of a +5V power
down control pin. A low-cost metal housing allows the
device to have a low thermal resistance to ensure long
lifetimes. All devices are 100% RF and DC tested.
The AP502 is targeted for use as a driver or final stage amplifier
in wireless infrastructure where high linearity and high power is
required. This combination makes the device an excellent
candidate for next generation multi-carrier 3G base stations.
123
456
Top View
Pin No.
1
2/4
3/5
6
Case
Function
RF Output
Vcc
Vpd
RF Input
Ground
Specifications
25 ºC, Vcc=12V, Vpd=5V, Icq=820mA, R7=0Ω, 50Ω unmatched fixture
Parameter
Operational Bandwidth
Test Frequency
Power Gain
wCDMA ACLR1 @ 25dBm (1)
wCDMA ACLR2 @ 25dBm (2)
Input Return Loss
Output Return Loss
Output P1dB
Output IP3
Operating Current @ 25 dBm
Quiescent Current, Icq
Device Voltage, Vcc
Device Voltage, Vpd (2)
Load Stability
Units
MHz
MHz
dB
dBc
dB
dB
dBm
dBm
mA
mA
V
V
VSWR
Min Typ Max
2110 – 2170
2140
28.5 30 34.5
-55 -50
-68 -53
11
5.3
+36
+52
790 840 940
780 820 920
+12
+5
10:1
1. 3GPP wCDMA signal modulation, Test model 1+32 DPCH, 3.84 MHz BW, ±5 MHz offset.
2. 3GPP wCDMA signal modulation, Test model 1+32 DPCH, 3.84 MHz BW, ±10 MHz offset.
3. Pull-down voltage: 0V = “OFF”, 5V=”ON”
Typical Performance (4)
Parameter
Operating Current @ 25 dBm
Quiescent Current, Icq
Device Voltage, Vcc
R7 value
Test Frequency
Power Gain
wCDMA ACLR1 @ 25dBm (2)
Input Return Loss
Output Return Loss
Output P1dB
Output IP3
Units
mA
mA
V
Ω
MHz
dB
dBc
dB
dB
dBm
dBm
Config1
840
820
+12
0
2140
30
-55
11
5.3
+36
+52
Config2
420
250
+12
730
2140
27.7
-47.5
10
7
+36
+50
4. Configuration 1 has the module biased in Class AB and is detailed on page 2 of the datasheet.
Performance is shown at 25 ºC, Vcc=12V, Vpd=5V, Icq=820mA, R7=0Ω, 50Ω unmatched fixture.
Configuration 2 has the module biased in near Class B and is detailed on page 3 of the datasheet.
Performance is shown at 25 ºC, Vcc=12V, Vpd=5V, Icq=250mA, R7=730Ω, 50Ω tuned fixture.
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
RF Input Power (continuous)
with output terminated in 50 Ω
Rating
-40 to +85 °C
-55 to +150 °C
+15 dBm
Ordering Information
Part No.
AP502
AP502-PCB
Description
UMTS-band 4W HBT Amplifier Module
Fully-Assembled Evaluation Board
(Class AB configuration, Icq=820mA)
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
Page 1 of 5 February 2006
1 page  
AP502
UMTS-band 4W HBT Amplifier Module
Outline Drawing
The Communications Edge TM
Product Information
AP502
1 23
456
Outline Drawing for the Heatsink Shipped
with the WJ Evaluation Board
Product Marking
The device will be marked with an “AP502” designator
with an alphanumeric lot code on the top surface of the
package noted as “ABCD” on the drawing.
A
manufacturing date will also be printed as “XXYY”, where
the “XX” represents the week number from 1 – 52.
The product will be shipped in tubes in multiples of 15.
ESD / MSL Information
ESD Rating: Class 1C
Value:
Passes at ≥ 1,000 to < 2,000 volts
Test:
Human Body Model (HBM)
Standard: JEDEC Standard JESD22-A114
ESD Rating: Class III
Value:
Passes ≥ 500 to < 1,000 volts
Test:
Charged Device Model (CDM)
Standard: JEDEC Standard JESD22-C101
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
Page 5 of 5 February 2006
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet AP502.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AP50-B10 | AC Current transducer AP-B10 |  LEM |
| AP50-B420L | AC Current transducer AP-B420L | LEM |
| AP5002 | PWM CONTROL 2A STEP-DOWN CONVERTER |  Diodes Incorporated |
| AP5004 | PWM CONTROL 2.5A STEP-DOWN CONVERTER | Diodes Incorporated |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |