Datenblatt-pdf.com


ECG099 Schematic ( PDF Datasheet ) - WJ Communication

Teilenummer ECG099
Beschreibung High Linearity InGaP HBT Amplifier
Hersteller WJ Communication
Logo WJ Communication Logo 




Gesamt 7 Seiten
ECG099 Datasheet, Funktion
www.DataSheet4U.com
AH118 / ECG099
¼ Watt, High Linearity InGaP HBT Amplifier Product Information
Product Features
60 – 3500 MHz
+24.7 dBm P1dB
+40.5 dBm Output IP3
20.4 dB Gain @ 900 MHz
16.5 dB Gain @ 1900 MHz
+5V Single Positive Supply
Available in lead-free / green
SOT-89 SMT Package Style
Applications
Final stage amplifiers for
Repeaters
Mobile Infrastructure
DBS / WLL / W-LAN
Defense / Homeland Security
Product Description
The AH118 / ECG099 is a high dynamic range driver
amplifier in a low-cost surface mount package. The
InGaP/GaAs HBT is able to achieve high performance
across a broad range with +40.5 dBm OIP3 and +24.7 dBm
of compressed 1dB power. The AH118 / ECG099 is
available in a lead-free/green/RoHS-compliant SOT-89
package. All devices are 100% RF and DC tested.
The AH118 / ECG099 is targeted for use as a driver
amplifier in wireless infrastructure where high linearity and
medium power is required. Internal biasing allows the
AH118 to maintain high linearity over temperature and
operate directly off a single +5V supply. This combination
makes the device an excellent candidate for transceiver line
cards in current and next generation multi-carrier 3G base
stations.
Functional Diagram
GND
4
1
RF IN
2
GND
3
RF OUT
Function
Input / Base
Output / Collector
Ground
Pin No.
1
3
2, 4
Specifications (1)
Parameter
Operational Bandwidth
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 (2)
IS-95A Channel Power
@ -45 dBc ACPR
W-CDMA Channel Power
@ -45 dBc ACLR, 2140 MHz
Noise Figure
Operating Current Range
Device Voltage
Units
MHz
MHz
dB
dB
dB
dBm
dBm
dBm
dBm
dB
mA
V
Min
60
13.5
+23
+39.5
140
Typ
1900
16.5
12
18
+24.7
+40.5
+18
+16.7
4.3
160
+5
Max
3500
175
1. Test conditions unless otherwise noted: 25ºC, Vsupply = +5 V, in tuned application circuit.
2. 3OIP measured with two tones at an output power of +11 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Typical Performance (3)
Parameter
Frequency
S21 - Gain
S11 - Input R.L.
S22 - Output R.L.
Output P1dB
Output IP3
IS-95A Channel Power
@ -45 dBc ACPR,
W-CDMA Channel Power
@ -45 dBc ACLR
Noise Figure
Supply Bias
Units
MHz
dB
dB
dB
dBm
dBm
dBm
dBm
dB
Typical
900 1900 2140
20.4 16.5 16.3
-15 -12 -15
-12 -18 -16
+24.2 +24.7 +24.7
+40 +40.5 +40.5
+18.2 +18
+16.7
4.0 4.3 4.8
+5 V @ 160 mA
3. Typical parameters reflect performance in a tuned application circuit: Vsupply = +5 V, I = 160
mA, +25° C
Ordering Information
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
RF Input Power (continuous)
Device Voltage
Device Current
Junction Temperature
Rating
-40 to +85 °C
-65 to +150 °C
+15 dBm
+6 V
220 mA
+250 °C
Operation of this device above any of these parameters may cause permanent damage.
Part No.
Description
AH118-89*
ECG099B*
AH118-89G
AH118-89PCB900
High Linearity InGaP HBT Amplifier
(lead-tin SOT-89 Pkg)
High Linearity InGaP HBT Amplifier
(lead-tin SOT-89 Pkg)
High Linearity InGaP HBTAmplifier
(lead-free/green/RoHS-compliant SOT-89 Pkg)
900 MHz Evaluation Board
AH118-89PCB1900 1900 MHz Evaluation Board
AH118-89PCB2140 2140 MHz Evaluation Board
* This package is being phased out in favor of the green package type which is backwards compatible for
existing designs. Refer to Product Change Notification WJPCN06MAY05TC1 on the WJ website.
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: [email protected] Web site: www.wj.com
Page 1 of 7 June 2005






ECG099 Datasheet, Funktion
AH118 / ECG099
¼ Watt, High Linearity InGaP HBT Amplifier
The Communications Edge TM
Product Information
AH118-89G (Green / Lead-free SOT-89 Package) Mechanical Information
This package is lead-free/Green/RoHS-compliant. It is compatible with both lead-free (maximum 260°C reflow temperature) and leaded
(maximum 245°C reflow temperature) soldering processes. The plating material on the leads is NiPdAu.
Outline Drawing
Product Marking
The component will be marked with an
“AH118G” designator with an alphanumeric
lot code on the top surface of the package.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
MSL / ESD Rating
Land Pattern
ESD Rating: Class 1A
Value:
Passes between 250 and 500V
Test:
Human Body Model (HBM)
Standard: JEDEC Standard JESD22-A114
MSL Rating: Level 3 at +260° C convection reflow
Standard: JEDEC Standard J-STD-020
Mounting Config. Notes
1. Ground / thermal vias are critical for the proper
performance of this device. Vias should use a .35mm
(#80 / .0135”) diameter drill and have a final plated
thru diameter of .25 mm (.010”).
2. Add as much copper as possible to inner and outer
layers near the part to ensure optimal thermal
performance.
3. Mounting screws can be added near the part to fasten
the board to a heatsink. Ensure that the ground /
thermal via region contacts the heatsink.
4. Do not put solder mask on the backside of the PC board
in the region where the board contacts the heatsink.
5. RF trace width depends upon the PC board material
and construction.
6. Use 1 oz. Copper minimum.
7. All dimensions are in millimeters (inches). Angles are
in degrees.
Thermal Specifications
Parameter
Rating
Operating Case Temperature
-40 to +85° C
Thermal Resistance (1)
92° C / W
Junction Temperature (2)
159° C
Notes:
1. The thermal resistance is referenced from the hottest
part of the junction to the ground tab (pin 4).
2. This corresponds to the typical biasing condition of
+5V, 160 mA at an 85° C ground tab temperature.
A minimum MTTF of 1 million hours is achieved
for junction temperatures below 247° C.
MTTF vs. GND Tab Temperature
100000
10000
1000
100
60
70 80 90 100 110 120
Tab Temperature (°C)
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: [email protected] Web site: www.wj.com
Page 6 of 7 June 2005

6 Page







SeitenGesamt 7 Seiten
PDF Download[ ECG099 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ECG099High Linearity InGaP HBT AmplifierWJ Communication
WJ Communication

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche