|
|
Teilenummer | GSP-830 |
|
Beschreibung | 3.0GHz Spectrum Analyzer USER MANUAL | |
Hersteller | GW Instek | |
Logo | ||
Gesamt 30 Seiten 3.0GHz Spectrum Analyzer
GSP-830
USER MANUAL
GW INSTEK PART NO. 82SP-83000MA1
ISO-9001 CERTIFIED MANUFACTURER
GSP-830 User Manual
SAFETY INSTRUCTIONS
This chapter contains important safety instructions that
you must follow when operating the GSP-830 and when
keeping it in storage. Read the following before operating
this instrument to ensure your safety and to keep the
GSP-830 in best condition.
Safety Symbols
These safety symbols may appear in this manual or on the GSP-830.
WARNING
CAUTION
Warning: Identifies conditions or practices that could
result in injury or loss of life.
Caution: Identifies conditions or practices that could
result in damage to the GSP-830 or to other properties.
DANGER High Voltage
Attention Refer to the Manual
Protective Conductor Terminal
Earth (ground) Terminal
Safety Guidelines
General Guideline • Make sure that the RF input level and the Tracking
Generator output reversed power level do not exceed
CAUTION
+30dBm.
• Do not supply an input signal to the Tracking Generator
output.
• Do not place any heavy object on the GSP-830.
• Avoid severe impacts or rough handling that leads to
damaging the GSP-830.
• Do not discharge static electricity onto the GSP-830.
6
6 Page GSP-830 User Manual
GKT-001 General Kit Set
ADP-002: SMA (J/F) to N (P/M) Adaptor x 2
ATN-100: 10dB Attenuator x 1
GTL-303: RF Cable Assembly (RD316, SMA(P),60cm) x2
GSC-002: Kit box
GKT-002 CATV Kit Set
ADP-001: BNC (J/F) to N (P/M) Adaptor x 2
ADP-101: BNC(P/M) 50Ω to BNC(J/F) 75Ω adaptor x2
GTL-304: RF Cable Assembly (RG223,N(P)-N(J),30cm) x2
GSC-003: Kit box
GKT-003 RLB Kit Set
GAK-001: Termination, N(P), 50Ω x 1
GAK-002: Cap with Chain, N(P) x 1
GTL-302: RF Cable Assembly (RG223, N(P), 30cm) x2
GSC-004: Kit box
GKT-006 EMI Probe Set
ADP-01: Adaptor, BNC(J/F) - N(P/M) x 1
ADP-02: Adaptor, SMA(J/F) – N(P/M) x 1
ANT-01: 6cm Loop, H-Field Probe x 1
ANT-02: 3cm Loop, H-Field Probe x 1
ANT-03: 6mm Loop, H-Field Probe x 1
PR-03: Touch Passive Probe, < 3GHz x 1
Test Lead: RF Cable Assembly BNC(P/M)-BNC(P/M)x1
Test Lead: RF Cable Assembly SMA(P/M)-SMA(P/M)x1
GRA-404 19 Inch Rack Adaptor Panel, 4U
GSC-001 Soft Carrying Case
GTL-301 RF Cable Assembly, RG223, N(P/M), 1000mm
GTL-302 RF Cable Assembly, RG223, N(P/M), 300mm
GTL-303 RF Cable Assembly, RD316, SMA(P/J), 600mm
GTL-304 RF Cable Assembly, RG223, N(P/M) to N(J/F),
300mm
GTL-401 DC Power Line with Lighter Plug, 5A
RLB-001 Return Loss Bridge
12
12 Page | ||
Seiten | Gesamt 30 Seiten | |
PDF Download | [ GSP-830 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
GSP-830 | 3.0GHz Spectrum Analyzer USER MANUAL | GW Instek |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |