Datenblatt-pdf.com


AD8368 Schematic ( PDF Datasheet ) - Analog Devices

Teilenummer AD8368
Beschreibung Linear-in-dB VGA
Hersteller Analog Devices
Logo Analog Devices Logo 




Gesamt 21 Seiten
AD8368 Datasheet, Funktion
FEATURES
Analog variable gain range: −12 dB to +22 dB
Linear-in-dB scaling: 37.5 dB/V
3 dB bandwidth: 800 MHz @ VGAIN = 0.5 V
Integrated rms detector
P1dB: 16 dBm @ 140 MHz
Output IP3: 33 dBm @ 140 MHz
Noise figure at maximum gain: 9.5 dB @ 140 MHz
Input and output impedances: 50 Ω
Single-supply voltage from 4.5 V to 5.5 V
RoHS-compliant, 24-lead LFCSP
APPLICATIONS
Complete IF AGC amplifiers
Gain trimming and leveling
Cellular base stations
Point-to-point radio links
RF instrumentation
GENERAL DESCRIPTION
The AD8368 is a variable gain amplifier (VGA) with analog
linear-in-dB gain control that can be used from low frequencies
to 800 MHz. Its excellent gain range, conformance, and flatness
are attributed to the Analog Devices, Inc., X-AMP® architecture,
an innovative technique for implementing high performance
variable gain control.
The gain range of −12 dB to +22 dB is scaled accurately to
37.5 dB/V with excellent conformance error. The AD8368 has
a 3 dB bandwidth of 800 MHz that is nominally independent
of gain setting. At 140 MHz, the OIP3 is 33 dBm at maximum
gain. The output noise floor is −143 dBm/Hz, which corresponds
to a 9.5 dB noise figure at maximum gain. The single-ended
input and output impedances are nominally 50 Ω.
The gain of the AD8368 can be configured to be an increasing
or decreasing function of the gain control voltage depending
on whether the MODE pin is pulled to the positive supply or
to ground, respectively. When MODE is pulled high, the
AD8368 operates as a typical VGA with increasing gain.
800 MHz, Linear-in-dB
VGA with AGC Detector
AD8368
ICOM 16
OCOM 6
GAIN 1
OCOM 7
INPT 19
ICOM 17
ICOM 18
ICOM 20
FUNCTIONAL BLOCK DIAGRAM
VPSO
MODE VPSO VPSI VPSI VPSI VPSI VPSI
10 21 9 11 12 22 23 13
AD8368
GAIN INTERPOLATOR
FIXED-GAIN
AMPLIFIER
OUTPUT
BUFFER
24 ENBL
gm STAGES
0dB –2dB –4dB
–36dB
50
DECL
ATTENUATOR LADDER
REF
X2
+
8 OUTP
3 HPFL
4 DECL
14 DECL
15 DECL
Figure 1.
2
DETO
5
DETI
By connecting MODE to ground and using the on-board rms
detector, the AD8368 can be configured as a complete
automatic gain control (AGC) system with RSSI. The output
power is accurately leveled to the internal default setpoint of
63 mV rms (−11 dBm referenced to 50 Ω), independent of the
waveform crest factor. Because the uncommitted detector
input is available at DETI, the AGC loop can level the signal at
the AD8368 output or at any other point in the signal chain
over a maximum input power range of 34 dB. Furthermore, the
setpoint level can be raised by dividing down the output signal
before applying it to the detector.
The AD8368 operates from a supply voltage of 4.5 V to 5.5 V
and consumes 60 mA of current. It can be fully powered down
to <3 mA by grounding the ENBL pin. The AD8368 is fabricated
using the Analog Devices proprietary SiGe SOI complementary
bipolar IC process. It is available in a 24-lead LFCSP and
operates over the industrial temperature range of −40°C to
+85°C. Application boards are available upon request.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2006–2008 Analog Devices, Inc. All rights reserved.






AD8368 Datasheet, Funktion
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
Supply Voltage (VPSO, VPSI)
ENBL and MODE Select Voltage
RF Input Level
Internal Power Dissipation
θJA
Maximum Junction Temperature
Operating Temperature Range
Storage Temperature Range
Lead Temperature (Soldering, 60 sec)
Rating
5.5 V
5.5 V
20 dBm
440 mW
52°C/W
125°C
−40°C to +85°C
−65°C to +150°C
300°C
AD8368
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. B | Page 5 of 20

6 Page









AD8368 pdf, datenblatt
VENBL
VOUTP
CH2 500mV CH3 5V M2.0µs 250MS/s
4.0ns/PT
A CH3 0.0V
Figure 27. ENBL Response Time
50
40
30
20
10
0
36.8 37.0 37.2 37.4 37.6 37.8 38.0
SLOPE (dB/V)
Figure 28. Gain Scaling Distribution (140 MHz)
38.2
AD8368
50
40
30
20
10
0
–15.0 –14.7 –14.4 –14.1 –13.8 –13.5
INTERCEPT (dB)
Figure 29. Gain Intercept Distribution (140 MHz)
Rev. B | Page 11 of 20

12 Page





SeitenGesamt 21 Seiten
PDF Download[ AD8368 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
AD8361LF to 2.5 GHz TruPwr DetectorAnalog Devices
Analog Devices
AD836250 Hz to 3.8 GHz 65 dB TruPwr DetectorAnalog Devices
Analog Devices
AD836350 dB TruPwr DetectorAnalog Devices
Analog Devices
AD8364LF to 2.7 GHz Dual 60 dB TruPwr DetectorAnalog Devices
Analog Devices
AD8366Dual-Digital Variable Gain AmplifiersAnalog Devices
Analog Devices

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche