|
|
PDF AD9863 Data sheet ( Hoja de datos )
| Número de pieza | AD9863 | |
| Descripción | Mixed-Signal Front-End (MxFE) Baseband Transceiver | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AD9863 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Mixed-Signal Front-End (MxFE™) Baseband
Transceiver for Broadband Applications
AD9863
FEATURES
Receive path includes dual 12-bit, 50 MSPS analog-to-digital
converters with internal or external reference
Transmit path includes dual 12-bit, 200 MSPS digital-to-
analog converters with 1×, 2×, or 4× interpolation and
programmable gain control
Internal clock distribution block includes a programmable
phase-locked loop and timing generation circuitry,
allowing single-reference clock operation
24-pin flexible I/O data interface allows various interleaved
or noninterleaved data transfers in half-duplex mode and
interleaved data transfers in full-duplex mode
Configurable through register programmability or
optionally limited programmability through mode pins
Independent Rx and Tx power-down control pins
64-lead LFCSP package (9 mm × 9 mm footprint)
APPLICATIONS
Broadband access
Broadband LAN
Communications (modems)
VIN+A
VIN–A
VIN+B
VIN–B
IOUT+A
IOUT–A
IOUT+B
IOUT–B
FUNCTIONAL BLOCK DIAGRAM
ADC
ADC
DATA
MUX
AND
LATCH
Rx DATA
DAC
DAC
LOW-PASS
INTERPOLATION
FILTER
I/O
INTERFACE
CONFIGURATION
BLOCK
DATA
LATCH
AND
DEMUX
Tx DATA
ADC CLOCK
DAC CLOCK
CLOCK
GENERATION
BLOCK
PLL
AD9863
Figure 1.
I/O
INTERFACE
CONTROL
FLEXIBLE
I/O BUS
[0:23]
CLKIN1
CLKIN2
GENERAL DESCRIPTION
The AD9863 is a member of the MxFE family—a group of
integrated converters for the communications market. The
AD9863 integrates dual 12-bit analog-to-digital converters
(ADC) and dual 12-bit digital-to-analog converters (TxDAC®).
The AD9863 ADCs are optimized for ADC sampling of 50 MSPS
and less. The dual TxDACs operate at speeds up to 200 MHz
and include a bypassable 2× or 4× interpolation filter. The
AD9863 is optimized for high performance, low power, and
small form factor to provide a cost-effective solution for the
broadband communications market.
The AD9863 uses a single input clock pin (CLKIN) or two
independent clocks for the Tx path and the Rx path. The ADC
and TxDAC clocks are generated within a timing generation
block that provides user programmable options such as divide
circuits, PLL multipliers, and switches.
A flexible, bidirectional 24-bit I/O bus accommodates a variety
of custom digital back ends or open market DSPs.
In half-duplex systems, the interface supports 24-bit parallel
transfers or 12-bit interleaved transfers. In full-duplex systems,
the interface supports a 12-bit interleaved ADC bus and a
12-bit interleaved TxDAC bus. The flexible I/O bus reduces pin
count, also reducing the required package size on the AD9863
and the device to which it connects.
The AD9863 can use either mode pins or a serial programma-
ble interface (SPI) to configure the interface bus, operate the
ADC in a low power mode, configure the TxDAC interpolation
rate, and control ADC and TxDAC power-down. The SPI
provides more programmable options for both the TxDAC path
(for example, coarse and fine gain control and offset control for
channel matching) and the ADC path (for example, the internal
duty cycle stabilizer and twos complement data format).
The AD9863 is packaged in a 64-lead LFCSP (low profile, fine
pitched, chip scale package). The 64-lead LFCSP footprint is
only 9 mm × 9 mm and is less than 0.9 mm high, fitting into
such tightly spaced applications as PCMCIA cards.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 © 2005 Analog Devices, Inc. All rights reserved.
1 page  
AD9863
RX PATH SPECIFICATIONS
FADC = 50 MSPS; internal reference; differential analog inputs, ADC_AVDD = DVDD = 3.3 V, unless otherwise noted.
Table 2.
Parameter
Rx PATH GENERAL
Resolution
Maximum ADC Sample Rate
Gain Mismatch Error
Offset Mismatch Error
Reference Voltage
Reference Voltage (REFT–REFB) Error
Input Resistance (Differential)
Input Capacitance
Input Bandwidth
Differential Analog Input Voltage Range
Rx PATH DC ACCURACY
Integral Nonlinearity (INL)
Differential Nonlinearity (DNL)
Aperture Delay
Aperture Uncertainty (Jitter)
Input Referred Noise
AD9863 Rx PATH DYNAMIC PERFORMANCE
(VIN = –0.5 dBFS; FIN = 10 MHz)
SNR
SINAD
THD (Second to Ninth Harmonics)
SFDR, Wide Band (DC to Nyquist)
Crosstalk Between ADC Inputs
Temp Test Level Min
Typ
Max Unit
Full V
Full IV
Full V
Full V
Full V
Full IV
Full V
Full V
Full V
Full V
12
50
±0.2
±0.1
1.0
−30 ±6
2
5
30
2
Bits
MSPS
% FS
% FS
V
+30 mV
kΩ
pF
MHz
V p-p differential
25°C V
25°C V
25°C V
25°C V
25°C V
±0.75
±0.75
2.0
1.2
250
LSB
LSB
ns
ps rms
µV
Full V
Full V
Full IV
Full IV
Full V
67
65.5
−73
68.3 74
80
−66.6
dBc
dBc
dBc
dBc
dB
Rev. A| Page 4 of 40
5 Page 
AD9863
TYPICAL PERFORMANCE CHARACTERISTICS
0
–10
–20
–30
40
–50
–60
–70
–80
–90
–100
–110
0
5 10 15 20
FREQUENCY (MHz)
25
Figure 4. AD9863 Rx Path Single-Tone FFT of Rx Channel B Path
Digitizing 2 MHz Tone
0
–10
–20
–30
40
–50
–60
–70
–80
–90
–100
–110
0
5 10 15 20
FREQUENCY (MHz)
25
Figure 5. AD9863 Rx Path Single-Tone FFT of Rx Channel B Path
Digitizing 5 MHz Tone
0
–10
–20
–30
40
–50
–60
–70
–80
–90
–100
–110
0
5 10 15 20
FREQUENCY (MHz)
25
Figure 6. AD9863 Rx Path Single-Tone FFT of Rx Channel B Path
Digitizing 24 MHz Tone
0
–10
–20
–30
40
–50
–60
–70
–80
–90
–100
–110
0
5 10 15 20
FREQUENCY (MHz)
25
Figure 7. AD9863 Rx Path Dual-Tone FFT of Rx Channel A Path
Digitizing 1 MHz and 2 MHz Tones
0
–10
–20
–30
40
–50
–60
–70
–80
–90
–100
–110
0
5 10 15 20
FREQUENCY (MHz)
25
Figure 8. AD9863 Rx Path Dual-Tone FFT of Rx Channel A Path
Digitizing 5 MHz and 8 MHz Tones
0
–10
–20
–30
40
–50
–60
–70
–80
–90
–100
–110
0
5 10 15 20
FREQUENCY (MHz)
25
Figure 9. AD9863 Rx Path Dual-Tone FFT of Rx Channel A Path
Digitizing 20 MHz and 25 MHz Tones
Rev. A| Page 10 of 40
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet AD9863.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AD9860 | Mixed-Signal Front-End (MxFE) Processor for Broadband Communications | Analog Devices |
| AD9861 | Mixed-Signal Front-End (MxFE-TM) Baseband Transceiver | Analog Devices |
| AD9862 | Mixed-Signal Front-End (MxFE) Processor for Broadband Communications | Analog Devices |
| AD9863 | Mixed-Signal Front-End (MxFE) Baseband Transceiver | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |