Datenblatt-pdf.com


P89LPC936 Schematic ( PDF Datasheet ) - NXP Semiconductors

Teilenummer P89LPC936
Beschreibung (P89LPC933 - P89LPC936) 8-bit microcontroller
Hersteller NXP Semiconductors
Logo NXP Semiconductors Logo 




Gesamt 70 Seiten
P89LPC936 Datasheet, Funktion
www.DataSheet4U.com
P89LPC933/934/935/936
8-bit microcontroller with accelerated two-clock 80C51 core
4 kB/8 kB/16 kB 3 V byte-erasable flash with 8-bit ADCs
Rev. 06 — 20 June 2005
Product data sheet
1. General description
The P89LPC933/934/935/936 is a single-chip microcontroller, available in low cost
packages, based on a high performance processor architecture that executes instructions
in two to four clocks, six times the rate of standard 80C51 devices. Many system-level
functions have been incorporated into the P89LPC933/934/935/936 in order to reduce
component count, board space, and system cost.
2. Features
2.1 Principal features
s 4 kB/8 kB/16 kB byte-erasable flash code memory organized into 1 kB/2 kB sectors
and 64-byte pages. Single-byte erasing allows any byte(s) to be used as non-volatile
data storage.
s 256-byte RAM data memory. Both the P89LPC935 and P89LPC936 also include a
512-byte auxiliary on-chip RAM.
s 512-byte customer data EEPROM on chip allows serialization of devices, storage of
setup parameters, etc. (P89LPC935/936).
s Dual 4-input multiplexed 8-bit A/D converters/DAC outputs (P89LPC935/936, single
A/D on P89LPC933/934).Two analog comparators with selectable inputs and
reference source.
s Two 16-bit counter/timers (each may be configured to toggle a port output upon timer
overflow or to become a PWM output) and a 23-bit system timer that can also be used
as an RTC.
s Enhanced UART with fractional baud rate generator, break detect, framing error
detection, and automatic address detection; 400 kHz byte-wide I2C-bus
communication port and SPI communication port.
s Capture/Compare Unit (CCU) provides PWM, input capture, and output compare
functions (P89LPC935/936).
s High-accuracy internal RC oscillator option allows operation without external oscillator
components.The RC oscillator option is selectable and fine tunable.
s 2.4 V to 3.6 V VDD operating range. I/O pins are 5 V tolerant (may be pulled up or
driven to 5.5 V).
s 28-pin TSSOP, PLCC, and HVQFN packages with 23 I/O pins minimum and up to 26
I/O pins while using on-chip oscillator and reset options.
DataSheet4 U .com






P89LPC936 Datasheet, Funktion
www.DataSheet4U.com
Philips Semiconductors
P89LPC933/934/935/936
8-bit microcontroller with accelerated two-clock 80C51 core
P1.6/OCB 5
P1.5/RST 6
VSS 7
P3.1/XTAL1 8
P3.0/XTAL2/CLKOUT 9
P1.4/INT1 10
P1.3/INT0/SDA 11
P89LPC935FA
25 P0.2/CIN2A/KBI2/AD11
24 P0.3/CIN1B/KBI3/AD12
23 P0.4/CIN1A/KBI4/DAC1/AD13
22 P0.5/CMPREF/KBI5
21 VDD
20 P0.6/CMP1/KBI6
19 P0.7/T1/KBI7
002aab074
Fig 4. P89LPC935 PLCC28 pin configuration
terminal 1
index area
P1.6/OCB
P1.5/RST
VSS
P3.1/XTAL1
P3.0/XTAL2/CLKOUT
P1.4/INT1
P1.3/INT0/SDA
1
2
3
4
5
6
7
P89LPC935FHN
21 P0.2/CIN2A/KBI2/AD11
20 P0.3/CIN1B/KBI3/AD12
19 P0.4/CIN1A/KBI4/DAC1/AD13
18 P0.5/CMPREF/KBI5
17 VDD
16 P0.6/CMP1/KBI6
15 P0.7/T1/KBI7
002aab076
Transparent top view
Fig 5. P89LPC935 HVQFN28 pin configuration
9397 750 15113
Product data sheet
DataSheet4 U .com
Rev. 06 — 20 June 2005
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
6 of 75

6 Page









P89LPC936 pdf, datenblatt
www.DataSheet4U.com
Philips Semiconductors
P89LPC933/934/935/936
8-bit microcontroller with accelerated two-clock 80C51 core
8. Functional description
Remark: Please refer to the P89LPC933/934/935/936 User manual for a more detailed
functional description.
8.1 Special function registers
Remark: SFR accesses are restricted in the following ways:
User must not attempt to access any SFR locations not defined.
Accesses to any defined SFR locations must be strictly for the functions for the SFRs.
SFR bits labeled ‘-’, logic 0 or logic 1 can only be written and read as follows:
‘-’ Unless otherwise specified, must be written with logic 0, but can return any
value when read (even if it was written with logic 0). It is a reserved bit and may be
used in future derivatives.
Logic 0 must be written with logic 0, and will return a logic 0 when read.
Logic 1 must be written with logic 1, and will return a logic 1 when read.
9397 750 15113
Product data sheet
DataSheet4 U .com
Rev. 06 — 20 June 2005
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
12 of 75

12 Page





SeitenGesamt 70 Seiten
PDF Download[ P89LPC936 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
P89LPC9308-bit microcontrollers with two-clock 80C51 core 4 kB/8 kB 3 V Flash with 256-byte data RAMNXP Semiconductors
NXP Semiconductors
P89LPC93018-bit MicrocontrollerNXP Semiconductors
NXP Semiconductors
P89LPC9301A18-bit MicrocontrollerNXP Semiconductors
NXP Semiconductors
P89LPC930FDH8-bit microcontrollers with two-clock 80C51 core 4 kB/8 kB 3 V Flash with 256-byte data RAMNXP Semiconductors
NXP Semiconductors
P89LPC931FDH8-bit microcontrollers with two-clock 80C51 core 4 kB/8 kB 3 V Flash with 256-byte data RAMNXP Semiconductors
NXP Semiconductors

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche