|
|
Número de pieza | DEM1420ULNA | |
Descripción | Ultra Low Noise Amplifier | |
Fabricantes | DEMI | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DEM1420ULNA (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! www.DataSheet4U.com
DEM 1420ULNA - 1420 MHz. Ultra Low Noise Amplifier
Specifications:
Gain:
Noise Figure:
P1dB:
Input VSWR:
Output VSWR:
Voltage:
17dB nominal
<.4dB
+5dBm output
>6dB @ design frequency
>10dB DC - 3 GHz.
+7 - +16 VDC
Product Description:
The DEM1420ULNA is one of a series of Ultra Low Noise Amplifiers that shares a common
design produced by Down East Microwave Inc. from 900 MHz. through 1700 MHz. Each model is
optimized for it’s own specified frequency. The ULNAs utilizes the latest in PHEMT technology and
is designed for receive systems such as EME stations and weak signal satellite reception requiring
the lowest noise figure as possible. All of the ULNAs are receive only and do not provide any RF
bypass switching circuitry. Standard gains of our ULNAs range from15 - 18 dB. All noise figures for
this series of ULNAs are below 0.4dB. The ULNAs are adjusted on an individual basis for the best
performance possible. This is accomplished with an internal negative voltage power supply that is
separate from the RF circuit and providesDpaotwaSehreseut4pUp.lcyoimsolation for the FET.
DataShee
Our ULNA design incorporates
a low loss series inductor input circuit
and a resistive loaded output circuit.
During testing, the input circuit is
optimized for gain and noise figure.
The resistive loaded output circuit, is
adjusted to control the gain and is
tested for a constant wide bandwidth
output impedance. This resistive load
impedance absorbs products caused
by reflections from band pass filters or
high Q receiver front ends. We do
not use tuned output circuits or
baluns in our ULNA designs. Tuned
output circuits and baluns do not offer
constant output impedances over wide bandwidths and may cause out of band instabilities from
reflected signals. Tuned circuits may also require returning if a cable length or the tuning of a filter
that is connected to the output of a tuned circuit LNA is changed.
This ULNA design is provided with type “N” connectors that are mounted on a weather
DataSheet4Upa.vcrooamiolaf bledieincaast
aluminum enclosure that measures 3.75” L
standard die cast enclosure if desired. Both
x 2.5” W x 1.375”
of these enclosures
H. It is also
enhances RF
/PD/1420ulna.doc
DataSheet4 U .com
1
Rev. A
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet DEM1420ULNA.PDF ] |
Número de pieza | Descripción | Fabricantes |
DEM1420ULNA | (DEMxxxULNA) Ultra Low Noise Amplifier | DEMI |
DEM1420ULNA | Ultra Low Noise Amplifier | DEMI |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |