|
|
Número de pieza | ADAPTEC-7902W | |
Descripción | ADAPTEC SCSI RAID Function | |
Fabricantes | ADAPTEC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ADAPTEC-7902W (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Adaptec SCSI RAID Function
(Only for Chipset AIC-7902W Used)
DataShee
DataSheet4U.com
USER'S MANUAL
DataSheet4U.com
DataSheet4 U .com
12ME-AI7902-001
DataSheet4U.com
1 page www.DataSheet4U.com
Introduction
1. Introduction
et4U.com
HostRAID™ is a product that adds entry-level RAID functionality to SCSI ASICs. With
HostRAID you can add reliable performance and full data protection for storage systems
using SCSI controllers.
HostRAID provides:
n An easy to use BIOS based setup and rebuild utility called SCSISelect®.
n An alert utility for Microsft Windows® that provides automatic error notification,
warnings, and task information.
DataShee
1.1 Features
HostRAID offers the following bDasaictaaSndhaedevta4nUce.dcfoematures:
n Bootable array support
n Support for up to 2 RAID arrays per channel in these combinations:
• One RAID 0 with 3 or 4 drives
• Two RAID 0s with two drives each
• One RAID 0 with two drives and one RAID 1
• Two RAID 1s with or without a spare each
n Support for all major SCSI peripherals
n Complete RAID configuration and management utility in the BIOS
n Support for transparent array (data) migration to Adaptec Intelligent RAID cards
n Support for Auto Rebuild (if there is a spare)
n Support for Auto Verify
n Support for Check Pointing
DataSheet4U.com
DataSheet4 U .com
-5-
DataSheet4U.com
5 Page www.DataSheet4U.com
et4U.com
Using the SCSISelect Utility to Manage Arrays
n Status — indicates available RAID status:
• Free — available drive
• Optimal — no defect
• Degraded — one drive in a mirrored array is in failed status, and a Rebuild
option is available.
• Dead — One drive in a RAID 0 array is in failed state or missing.
• Building — the drive is a target of an ongoing Rebuild operation
• Verifying — checking the data integrity of redundant data stored on fault-
tolerant arrays
DataShee
2.1.3 Viewing Array
To view an array, select the array and press Enter. A detailed view of the hard drives will
appear. From this window you can see the status of the individual hard drives. The status
you might see are:
n Optimal — no defect
n Building — the drive is a target of an ongoing Rebuild operation
n Verify — checking the data integrity of redundant data stored on fault-tolerant
DataSheet4U.com
arrays
Missing drive information indicates that a member is missing and the array is not optimal.
2.1.4 Exiting the SCSISelect Utility
To exit SCSISelect, press Esc until a message prompts you to exit. Select Yes to exit,
then press any key to restart the system. Any changes you made in SCSISelect take effect
after the system restarts.
DataSheet4U.com
DataSheet4 U .com
- 11 -
DataSheet4U.com
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet ADAPTEC-7902W.PDF ] |
Número de pieza | Descripción | Fabricantes |
ADAPTEC-7902W | ADAPTEC SCSI RAID Function | ADAPTEC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |