|
|
Teilenummer | AD22282 |
|
Beschreibung | (AD22282 / AD22283) ACCELERATION DETECTOR | |
Hersteller | Analog Devices | |
Logo | ||
Gesamt 13 Seiten FEATURES
Complete acceleration measurement system on a
single monolithic IC
Available in ±120 g or ±250 g output full-scale ranges
Full differential sensor and circuitry for high resistance
to EMI/RFI
Environmentally robust packaging
Complete mechanical and electrical self-test on
digital command
Output ratiometric to supply
Sensitive axes in the plane of the chip
High linearity (0.2% of full scale)
Frequency response down to dc
Low noise
Low power consumption (1.5 mA)
Tight sensitivity tolerance and 0 g offset capability
Largest available prefilter clipping headroom
400 Hz, 2-pole Bessel filter
Single-supply operation
Compatible with Sn/Pb and Pb-free solder processes
Qualified for automotive applications
APPLICATIONS
Vibration monitoring and control
Vehicle collision sensing
Shock detection
Single-Axis, High-g,
iMEMS® Accelerometers
ADXL193
GENERAL DESCRIPTION
The ADXL193 is a low power, complete single-axis
accelerometer with signal conditioned voltage outputs that are
all on a single monolithic IC. This product measures
acceleration with a full-scale range of ±120 g or ±250 g
(minimum). It can also measure both dynamic acceleration
(vibration) and static acceleration (gravity).
The ADXL193 is a fourth-generation surface micromachined
iMEMS® accelerometer from ADI with enhanced performance
and lower cost. Designed for use in front and side impact airbag
applications, this product also provides a complete cost-
effective solution useful for a wide variety of other applications.
The ADXL193 is temperature stable and accurate over the
automotive temperature range, with a self-test feature that fully
exercises all the mechanical and electrical elements of the
sensor with a digital signal applied to a single pin.
The ADXL193 is available in a 5 mm × 5 mm × 2 mm,
8-terminal ceramic LCC package.
VS
VDD
VDD2
FUNCTIONAL BLOCK DIAGRAM
TIMING
GENERATOR
ADXL193
EXC
DIFFERENTIAL
SENSOR
DEMOD
AMP
400Hz
BESSEL
FILTER
XOUT
SELF-TEST
Figure 1.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2010 Analog Devices, Inc. All rights reserved.
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
VDD2
8
NC 1
7 VDD
NC 2
ADXL193
TOP VIEW
6 XOUT
(Not to Scale)
COM 3
5 NC
4
ST
NC = NO CONNECT
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
Mnemonic
1 NC
2 NC
3 COM
4 ST
5 NC
6 XOUT
7 VDD
8 VDD2
Description
Do Not Connect
Do Not Connect
Common
Self-Test
Do Not Connect
X Channel Output
3.5 V to 6 V
3.5 V to 6 V
ADXL193
Rev. B | Page 5 of 12
6 Page NOTES
ADXL193
Rev. B | Page 11 of 12
12 Page | ||
Seiten | Gesamt 13 Seiten | |
PDF Download | [ AD22282 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
AD22280 | (AD22279 - AD22281) ACCELERATION DETECTOR | Analog Devices |
AD22281 | (AD22279 - AD22281) ACCELERATION DETECTOR | Analog Devices |
AD22282 | (AD22282 / AD22283) ACCELERATION DETECTOR | Analog Devices |
AD22283 | (AD22282 / AD22283) ACCELERATION DETECTOR | Analog Devices |
AD22284 | (AD22284 - AD22286) ACCELERATION DETECTOR | Analog Devices |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |