|
|
PDF E3X-DA Data sheet ( Hoja de datos )
| Número de pieza | E3X-DA | |
| Descripción | Fiber Optic Accessories | |
| Fabricantes | Omron Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de E3X-DA (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Fiber-Optic Accessories
Various Accessories Expand the
Usefulness of the Fiber-Optic Cables
s Lenses extend sensing distances
s Side-view attachments provide space
savings
s Flexible stainless steel tubes protect
plastic fibers from mechanical damage
s Thin fiber adapters as replacement
s Splices for 2.2 mm fiber can be used to
repair cut fiber
E39
Ordering Information
s ATTACHMEwNTSww.DataSheet4U.com
Description
Part number
Focusing lens pair (use with E32-TC50/200/500/1000, E32-T11(L), E32-TC200C, E32-T61)
E39-F1
Side-view reflector pair
E39-F2
Convergent beam conversion kit (to fit fibers that accept E39-F1 lenses)
E39-F3
Pinpoint focusing lens (for E32-D32)
E39-F3A
Side-view diffuse reflective conversion kit (for through-beam fibers)
E39-F5
s PROTECTIVE STAINLESS STEEL FLEXIBLE TUBES FOR PLASTIC FIBERS
Description
E32-DC200E, E32-DC200F(4), E32-D21, E32-D21L
E32-DC200, E32-DC200B(4), E32-CC200, E32-D11
E32-D11L, E32-D51
E32-TC200E, E32-TC200F(4), E32-T21, E32-T12L
E32-TC200, E32-TC200B(4), E32-T11, E32-T11L,
E32-T51L
Appearance
Single tubes
Pairs
Length (L)
0.5 m
1m
0.5 m
1m
0.5 m
1m
0.5 m
1m
Part number
E39-F32A5
E39-F32A
E39-F32D5
E39-F32D
E39-F32B5
E39-F32B
E39-F32C5
E39-F32C
s ADAPTERS/REPAIR PARTS
Description
Thin fiber adapter (1.0 mm to 2.2 mm dia.)
Splice for 2.2 mm dia. fiber (except E32-T51/E32-D51)
Fiber cutting tool (supplied with each trimmable plastic fiber optic cable)
Fiber probe bending tool
Mounting bracket replacement for E32-T16 (order two)
Part number
E39-F9
E39-F10
E39-F4
E39-F11
E39-L4
www.DataSheet4U.com
1 page  
www.DataSheet4U.com
E39
E39-F2 Side View Attachment
These attachments provide 90° angle
viewing for through-beam cables. Use
then with E32-TC50, E32-TC200 and E32-
TC200C plastic filament cables and E32-
T61 glass filament cables. Screw each
piece onto the threaded tip of each
sensing head.
Note: This attachment does not increase sensing distance.
E39
E39-F3 Diffuse Reflective Conversion Bracket
This bracket converts through-beam fiber
cables for diffuse reflective sensing. Use it
with E32-TC50, E32-TC200 and E32-
TC200C plastic filament cables. A set of
E39-F1 lenses are supplied with this
conversion bracket. To install, first remove
the mounting nuts from the fiber-optic
sensing heads. Then loosen the two set
screws on the bracket. Insert the sensing
ends through the bracket, then attach the
lenses. Tighten the two set screws to hold
the sensing heads in place. Mount the
bracket at the detection site, then loosen
the large center screw to adjust the angle.
When the angle that produces reliable
detection has been found, tighten the
screw to retain that angle.
E39-F3A Reflective Unit Lens (for E32-D32 Fiber)
When E39-F3A is attached to an E32-D32
fiber, adjust the focal point so that the
amplifier will not detect its own light
reflected from inside the E39-F3A.
E39-F3A so that the light spot is as small
as possible. Then fasten the sensing head
using the Allen head wrench supplied with
the E39-F3A.
www.DataSheet4U.comPlace the object to be detected or while
In the example shown,
paper at the sensing distance, then adjust A = The focus is farther than the E39-F3A
the insertion depth of the fiber into the
B = The focus is closer than the E39-F3A.
E39-F5 Diffuse Reflective Side View Conversion Block
This reflective side view block may be
used with E32-TC200A plastic filament
fiber-optic cable only. It provides a 2 cm
(0.79 in) sensing distance. To install, first
remove mounting nuts and washers from
fiber-optic sensing head. Then, screw the
threaded heads as far as they will go onto
the mounting holes on the narrow side of
the block.
5
www.DataSheet4U.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet E3X-DA.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| E3X-DA | Fiber Optic Accessories | Omron Electronics |
| E3X-DA-S | Digital Fiber Sensors |  Omron |
| E3X-DAC-S | Color Sensing Digital Fiber Sensor | Omron Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |