Datenblatt-pdf.com


D75316 Schematic ( PDF Datasheet ) - NEC

Teilenummer D75316
Beschreibung UPD75316
Hersteller NEC
Logo NEC Logo 




Gesamt 30 Seiten
D75316 Datasheet, Funktion
DATA SHEET
MOS INTEGRATED CIRCUIT
µPD75312(A), 75316(A)
4-BIT SINGLE-CHIP MICROCOMPUTER
DESCRIPTION
The µPD75316(A) is one of the 75X Series 4-bit single-chip microcomputer having a built-in LCD controller/
driver, and has a data processing capability comparable to that of an 8-bit microcomputer.
In addition to high-speed operation with 0.95 µs minimum instruction execution time for the CPU, the
µPD75316(A) can also process data in 1-, 4-, and 8-bit units. Therefore, as a 4-bit single-chip microcomputer
chip having a built-in LCD panel controller/driver, its data processing capability is the highest in its class in
the world.
Detailed functions are described in the following user's manual. Be sure to read it for designing.
µPD75308 User's Manual: IEM-5016
FEATURES
Higher reliability than µPD75316
Internal memory
• Program memory (ROM)
: 16256 × 8 bits (µPD75316(A))
: 12160 × 8 bits (µPD75312(A))
• Data memory
: 512 × 4 bits
Capable of high-speed operation and variable instruction execution time to power save
• 0.95 µs, 1.91 µs, 15.3 µs (operating at 4.19 MHz)
• 122 µs (operating at 32.768 kHz)
75X architecture comparable to that for an 8-bit microcomputer is employed
Built-in programmable LCD controller/driver
Clock operation at reduced power dissipation: 5 µA TYP. (operating at 3 V)
Enhanced timer function (3 channels)
Interrupt functions especially enhanced for applications, such as remote control receiver
Pull-up resistors can be provided for 31 I/O lines
Built-in NEC standard serial bus interface (SBI)
Upgraded model of µPD7514 (µPD7500 Series)
PROM version (µPD75P316, µPD75P316A) available
APPLICATIONS
Suitable for controlling automotive and transportation equipment.
The µPD75316(A) is treated as the representative model throughout this document,
unless there are differences between µPD75312(A) and µPD75316(A) functions.
The information in this document is subject to change without notice.
Document No. IC-2825A
(O. D. No. IC-8270A)
Date Published December 1993 P
Printed in Japan
The mark 5 shows major revised points.
© NEC Corporation 1991






D75316 Datasheet, Funktion
µPD75312(A), 75316(A)
13. RECOMMENDED SOLDERING CONDITIONS ............................................................................... 57
APPENDIX A. COMPARISION OF FEATURES AMONG THIS SERIES PRODUCTS ..................... 58
APPENDIX B. DEVELOPMENT TOOLS .............................................................................................. 59
APPENDIX C. RELATED DOCUMENTS .............................................................................................. 60
6

6 Page









D75316 pdf, datenblatt
µPD75312(A), 75316(A)
(cont'd)
Pin Name Input/Output Also Served
As
Function
RESET
NC *5
VDD
VSS
Input
— System reset input
— No connection
— Positive power supply
— GND
When Reset
Input/
Output
Circuit
TYPE*1
B
——
——
——
*1: Circles indicate Schmitt trigger inputs.
2: For these display output, VLCX indicated below are selected as the input source.
S0 to S31: VLC1, COM0 to COM2: VLC2, COM3: VLC0
However, display output level varies depending on the particular display output and VLCX
external circuit.
3: Internal dividing resistor provided
: Low level
Internal dividing resistor not provided : High impedance
4: These pins are provided for future system expansion. At present, these pins are used only as
pins P30 and P31.
5: When sharing the printed circuit board with the µPD75P316 and 75P316A, the NC pin must be
connected to VDD.
12

12 Page





SeitenGesamt 30 Seiten
PDF Download[ D75316 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
D753108GC UPD753108GCNEC
NEC
D75316 UPD75316NEC
NEC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche