|
|
Número de pieza | EMIF10-COM01C1 | |
Descripción | EMI FILTER INCLUDING ESD PROTECTION | |
Fabricantes | ST Microelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de EMIF10-COM01C1 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! ®
IPAD™
EMIF10-COM01C1
EMI FILTER
INCLUDING ESD PROTECTION
MAIN PRODUCT CHARACTERISTICS
EMI filtering and ESD protection for:
■ Computers and printers
■ Communication systems
■ Mobile phones
DESCRIPTION
The EMIF10-COM01C1 is a highly integrated
device designed to suppress EMI / RFI noise in all
systems subjected to electromagnetic interfer-
ences. The EMIF10 Flip-Chip packaging means
the package size is equal to the die size.
Additionally, this filter includes an ESD protection
circuitry which prevents the protected device from
destruction when subjected to ESD surges up to
15 kV.
BENEFITS
■ EMI symmetrical (I/O) low-pass filter
■ Coating resin on back side
■ Very low PCB space consuming: < 7mm2
■ Very thin package: 0.65 mm
■ High efficiency in ESD suppression on both
input & output pins
■ High reliability offered by monolithic integration
COMPLIES WITH THE FOLLOWING STANDARDS:
IEC61000-4-2 level 4
15kV (air discharge)
8kV (contact discharge)
Coated Flip-Chip
(25 Bumps)
Table 1: Order Code
Part Number
EMIF010-COM01C1
Marking
FE
Figure 1: Pin Configuration (Ball side)
EDCBA
I5 I4 I3 I2 I1 1
I10 I9 I8 I7 I6 2
GND GND GND GND GND 3
010 09 08 07 06 4
05 04 03 02 01 5
Figure 2: Basic cell configuration
Input
Low-pass Filter
Output
TM: IPAD is a trademark of STMicroelectronics.
March 2005
www.DataSheet4U.com
REV. 1
RI/O = 200Ω
Cline = 45 pF
www.DataSheet4U1.c/7om
1 page Figure 10: Ordering Information Scheme
EMI Filter
Number of lines
Information
x = resistance value (Ohms)
z = capacitance value / 10(pF)
or
3 letters = application
2 digits = version
Package
C = Coated Flip-Chip
x = 1: 500µm, Bump = 315µm
EMIF10-COM01C1
EMIF yy - xxx zz Cx
Figure 11: FLIP-CHIP Package Mechanical Data
500µm ± 50
315µm ± 50
695µm ± 70
2.64mm ± 50µm
Figure 12: Foot print recommendations
Copper pad Diameter :
250µm recommended , 300µm max
Solder stencil opening : 330µm
Solder mask opening recommendation :
340µm min for 315µm copper pad diameter
Figure 13: Marking
Dot, ST logo
xx = marking
z = packaging location
yww = datecode
(y = year
ww = week)
All dimensions in µm
545 400
xxz
y ww
5/7
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet EMIF10-COM01C1.PDF ] |
Número de pieza | Descripción | Fabricantes |
EMIF10-COM01C1 | EMI FILTER INCLUDING ESD PROTECTION | ST Microelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |