Datenblatt-pdf.com


ACSL-6210 Schematic ( PDF Datasheet ) - Agilent

Teilenummer ACSL-6210
Beschreibung (ACSL-6xx0) Multi-Channel and Bi-Directional / 15 MBd Digital Logic Gate Optocoupler
Hersteller Agilent
Logo Agilent Logo 




Gesamt 10 Seiten
ACSL-6210 Datasheet, Funktion
Agilent ACSL-6xx0
Multi-Channel and Bi-Directional,
15 MBd Digital Logic Gate Optocoupler
Data Sheet
Description
ACSL-6xx0 are truly isolated,
multi-channel and bi-directional,
high-speed optocouplers. Integra-
tion of multiple optocouplers in
monolithic form is achieved
through patented process tech-
nology. These devices provide full
duplex and bi-directional iso-
lated data transfer and communi-
cation capability in compact
surface mount packages. Avail-
able in 15 Mbd speed option and
wide supply voltage range.
These high channel density make
them ideally suited to isolating
data conversion devices, parallel
buses and peripheral interfaces.
Applications
• Full duplex communication
• Isolated line receiver
• Computer-peripheral interfaces
• Microprocessor system interfaces
• Digital isolation for A/D and D/A
conversion
• Switching power supply
• Instrument input/output isolation
• Ground loop elimination
• Pulse transformer replacement
Features
• Available in dual, triple and quad
channel configurations
• Bi-directional
• Wide supply voltage range
3.0V to 5.5V
• High-speed: 15 MBd typical,
10 MBd minimum
• 10 kV/µs minimum Common Mode
Rejection (CMR) at Vcm = 1000 V
• LSTTL/TTL compatible
• Safety and regulatory approvals
(Pending)
– 2500Vrms for 1 min per UL1577
– CSA Component Acceptance
– IEC/EN/DIN EN 60747-5-2
• 16 Pin narrow-body SOIC package
for triple and quad channel
• -40 to 100°C temperature range
They are available in 8-pin and
16pin narrow-body SOIC
package and are specified over
the temperature range of
-40°C to +100° C.
CAUTION:
It is advised that normal static precautions be taken in handling and
assembly of this component to prevent damage and/or degradation,
which may be induced by ESD.






ACSL-6210 Datasheet, Funktion
Regulatory Information
Insulation and Safety Related Specifications
Parameter
Symbol
Minimum External Air Gap (Clearance)
L(I01)
Value
4.9
Minimum Externa l Tracking(Creepage)
L(I02)
4.5
Minimum Internal Plastic Gap (Internal Clearance)
0.08
Tracking Resistance (Comparative Tracking Index) CTI
Isolation Group
175
IIIa
Units
mm
mm
mm
Volts
Conditions
Measured from input terminals to output terminals,
shortest distance through air
Measured from input terminals to output terminals,
shortest distance path through body
Insulation thickness between emitter and detector;
also known as distance through insulation
DIN IEC 112/VDE0303 Part 1
Material Group (DIN VDE 0110, 1/89, Table 1)
IEC/EN/DIN EN 60747-5-2 Insulation Related Characteristics (Option X6X Only)
Description
Symbol
ACSL-6XX0-X6X
Units
Installation Classification per DIN VDE 0110/1.89, Table 1
for rated mains voltage 150V rms
for rated mains voltage 300V rms
I-IV
I-III
Climatic Classification
55/100/21
Pollution Degree (DIN VDE 0110/1.89)
2
Maximum Working Insulation Voltage
VIORM
560
Vpeak
Input to Output Test Voltage, Method b *
VIORM x 1.875 = VPR, 100% Production
Test with tm = 1 sec, Partial Discharge < 5 pC
VPR
1050
Vpeak
Input to Output Test Voltage, Method a *
VIORM x 1.5 = VPR, Type and Sample Test,
Tm = 60 sec, Partial Discharge < 5 pC
VPR 840
Vpeak
Highest Allowable Overvoltage *
(Transient Overvoltage, tini = 10 sec)
VIOTM
4000
Vpeak
Safety Limiting Values
(Maximum values allowed in the event of a failure)
Case Temperature
Input Current
Output Power
Insulation Resistance at TS, VIO = 500V
TS
IS,INPUT
PS,OUTPUT
RIO
175
150
600
109
°C
mA
mW
*Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section, IEC/EN/DIN EN 60747-5-2,
for a detailed description.
Note: Isolation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits in application.
6

6 Page







SeitenGesamt 10 Seiten
PDF Download[ ACSL-6210 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ACSL-6210(ACSL-6xx0) Multi-Channel and Bi-Directional / 15 MBd Digital Logic Gate OptocouplerAgilent
Agilent

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche