Datenblatt-pdf.com


DS1218 Schematic ( PDF Datasheet ) - Dallas Semiconducotr

Teilenummer DS1218
Beschreibung Nonvolatile Controller
Hersteller Dallas Semiconducotr
Logo Dallas Semiconducotr Logo 




Gesamt 4 Seiten
DS1218 Datasheet, Funktion
www.dalsemi.com
DS1218
Nonvolatile Controller
FEATURES
Converts CMOS RAM into nonvolatile
memories
Unconditionally write protects when VCC is
out of tolerance
Automatically switches to battery when
power fail occurs
Space saving 8-pin mini-DIP/8-pin 150 mil
SOIC
Consumes less than 100 na of battery current
PIN ASSIGNMENT
VCCO
NC
NC
GND
1
2
3
4
8 VCCI
7 VBAT
6 CEO
5 CEI
PIN DESCRIPTION
VCCI
VCCO
- Input +5 Volt Supply
- RAM Power (VCC) Supply
CEI - Chip Enable Input
NC - No Connection
CEO
VBAT
GND
- Chip Enable Output
- + Battery
- Ground
DESCRIPTION
The DS1218 is a CMOS circuit which solves the application problems of converting CMOS RAM into
nonvolatile memory. Incoming power is monitored for an out-of-tolerance condition. When such a
condition is detected, the chip enable output is inhibited to accomplish write protection and the battery is
switched on to supply RAM with uninterrupted power. Special circuitry uses a low-leakage CMOS
process which affords precise voltage detection at extremely low battery consumption. The 8-pin mini-
DIP package keeps PC board real estate requirements to a minimum. By combining the DS1218
nonvolatile controller chip with a full CMOS memory and lithium batteries, 10 years of nonvolatile RAM
operation can be achieved.
OPERATION
The DS1218 Nonvolatile Controller performs the circuit functions required to battery back-up a RAM.
First, a switch is provided to direct power from the battery or VCCI supply, depending on which is greater.
This switch has a voltage drop of less than 0.2V. The second function which the nonvolatile controller
provides is power-fail detection. The DS1218 constantly monitors the VCC supply. When VCCI falls to
1.26 times the battery voltage, a precision comparator outputs a power-fail detect signal to the chip enable
logic. The third function of write protection is accomplished by holding the chip enable output signal to
within 0.2V of the VCCI or battery supply, when a power-fail condition is detected.
During nominal supply conditions, the chip enable output will follow chip enable input with a maximum
propagation delay of 10 ns.
1 of 4
111899





SeitenGesamt 4 Seiten
PDF Download[ DS1218 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
DS1210Nonvolatile Controller ChipDallas Semiconducotr
Dallas Semiconducotr
DS1211Nonvolatile Controller x 8 ChipDallas Semiconducotr
Dallas Semiconducotr
DS1212Nonvolatile Controller x 16 ChipDallas Semiconducotr
Dallas Semiconducotr
DS1213BSmartSocket 16k/64kDallas Semiconducotr
Dallas Semiconducotr
DS1213CSmartSocket 256kDallas Semiconducotr
Dallas Semiconducotr

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche