Datenblatt-pdf.com


AGN21xxx Schematic ( PDF Datasheet ) - Matsushita Electric

Teilenummer AGN21xxx
Beschreibung (AGN2xx) ULTRA-SMALL PACKAGE SLIM POLARIZED RELAY
Hersteller Matsushita Electric
Logo Matsushita Electric Logo 




Gesamt 4 Seiten
AGN21xxx Datasheet, Funktion
GNTESTING
ULTRA-SMALL PACKAGE
GN-RELAYSSLIM POLARIZED RELAY
10.60±0.3
.417±.012
5.70±0.3
.224±.012
9.00±0.3
.354±.012
10.60±0.3
.417±.012
5.70±0.3
.224±.012
Max.10.00
.394
mm inch
FEATURES
• Compact slim body saves space
Thanks to the small surface area of 5.7
mm × 10.6 mm .224 inch × .417 inch and
low height of 9.0 mm .354 inch, the pack-
aging density can be increased to allow
for much smaller designs.
• Outstanding surge resistance.
Surge withstand between open contacts:
1,500 V 10×160 µs (FCC part 68)
Surge withstand between contacts and
coil: 2,500 V 2×10 µs (Bellcore)
• The use of twin crossbar contacts en-
sures high contact reliability.
AgPd contact is used because of its good
sulfide resistance. Adopting low-gas
molding material. Coil assembly molding
technology which avoids generating vola-
tile gas from coil.
• Increased packaging density
Due to highly efficient magnetic circuit de-
sign, leakage flux is reduced and changes
in electrical characteristics from compo-
nents being mounted close-together are
minimized. This all means a packaging
density higher than ever before.
• Nominal operating power: 140 mW
• Outstanding vibration and shock re-
sistance.
Functional shock resistance:
750 m/s2 {75G}
Destructive shock resistance:
1,000 m/s2 {100G}
Functional vibration resistance:
10 to 55 Hz (at double amplitude of 3.3
mm .130 inch)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of 5 mm
.197 inch)
SPECIFICATIONS
Contact
Arrangement
2 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1A )
100 m
Contact material
Stationary: AgPd+Au clad
Movable: AgPd
Nominal switching capacity
(resistive load)
1 A 30 V DC
0.3 A 125 V AC
Rating
Max. switching power
(resistive load)
Max. switching voltage
30 W, 37.5 V A
110 V DC, 125 V AC
Max. switching current
Min. switching capacity f1
1A
10 µA 10 mV DC
Nominal
operating
power
Single side stable
1 coil latching
140mW (1.5 to 12 V DC)
230mW (24 V DC)
100mW (1.5 to 12 V DC)
120mW (24 V DC)
Mechanical (at 180 cpm)
5 × 107
Expected
life (min.
operations)
Electrical
(at 20 cpm)
1 A 30 V DC
resistive
0.3 A 125 V AC
resistive
105
105
Remarks:
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section.
*2 Detection current: 10mA.
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 By resistive method, nominal voltage applied to the coil; contact carrying current:
1 A.
*5 Half-wave pulse of sine wave: 6 ms; detection time: 10µs.
*6 Half-wave pulse of sine wave: 6 ms.
*7 Detection time: 10µs.
*8 Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 61)
Characteristics
Initial insulation resistance*1
Min. 1,000M(at 500V DC)
Initial
breakdown
voltage*2
Between open contacts
Between contact sets
Between contacts and coil
750 Vrms for 1min.
1,000 Vrms for 1min.
1,500 Vrms for 1min.
Initial surge
voltage
Between open contacts
(10×160 µs)
Between contacts and coil
(2×10 µs)
1,500 V (FCC Part 68)
2,500 V (Bellcore)
Operate time [Set time]*3 (at 20°C)
Max. 4 ms (Approx. 2 ms)
[Max. 4 ms (Approx. 2 ms)]
Release time (without diode)
[Reset time]*3 (at 20°C)
Max. 4 ms (Approx. 1 ms)
[Max. 4 ms (Approx. 2 ms)]
Temperature rise*4 (at 20°C)
Max. 50°C
Shock resistance
Functional*5
Destructive*6
Min. 750 m/s2{75G]
Min. 1,000 m/s2{100G]
Vibration resistance
Functional*7
Destructive
10 to 55 Hz at double
amplitude of 3.3 mm
10 to 55 Hz at double
amplitude of 5 mm
Conditions for opera- Ambient
tion, transport and temperature f2
storage*8
(Not freezing and con-
densing at low tem- Humidity
perature)
–40°C to 85°C
–40°F to 185°F
5 to 85% R.H.
Unit weight
Approx. 1 g.035 oz
Notes:
f1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
f2 The upper limit for the ambient temperature is the maximum temperature that
can satisfy the coil temperature rise. Under the packing condition, allowable
temperature range is from –40 to +70°C –40° to +158°F.
125





SeitenGesamt 4 Seiten
PDF Download[ AGN21xxx Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
AGN21xxx(AGN2xx) ULTRA-SMALL PACKAGE SLIM POLARIZED RELAYMatsushita Electric
Matsushita Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche