|
|
PDF ACD-94 Data sheet ( Hoja de datos )
| Número de pieza | ACD-94 | |
| Descripción | AM/FM/MPX Radio | |
| Fabricantes | audiovox | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ACD-94 (archivo pdf) en la parte inferior de esta página. Total 24 Páginas | ||
|
No Preview Available !
OWNER'S MANUAL
ACD-94
AM/FM/MPX RADIO WITH
FOLD-DOWN DETACHABLE FRONT PANEL,
w COMPACT DISC PLAYER,
w CD CHANGER CONTROLS, MP3 CD PLAYBACK,
w WIRELESS REMOTE CONTROL
.DataSheet4U.comAND QUARTZ CLOCK
1 page  
SPEAKER WIRING
REFER TO PAGE 4
FOR RADIO WIRING
WARNING!
! THE AMPLIFIERS IN THIS RADIO ARE ONLY DESIGNED FOR USE WITH 4 SPEAKERS.
! NEVER COMBINE (BRIDGE) OUTPUTS FOR USE WITH 2 SPEAKERS.
! NEVER GROUND NEGATIVE SPEAKER LEADS TO CHASSIS GROUND.
! FAILURE TO WIRE EXACTLY AS SHOWN BELOW MAY CAUSE ELECTRICAL
RCA LINE IN
JACKS
RCA LINE OUT
FOR USE WITH JACKS
AUXILIARY INPUT FOR USE WITH
DEVICES (CD OPTIONAL
PLAYER, ETC.) EXTERNAL
AMPLIFIERS
BLK GREY
WHITE = LEFT
RED = RIGHT
9-PINPLUGS
RADIO
NOTE:
THIS RADIO WILL CONTROL RAMPAGE CD
CHANGER MODEL. CHECK WITH YOUR RAMPAGE
AUDIOVOX CAR STEREO SPECIALIST OR CALL
1-800-645-4994 FOR RECOMMENDATIONS OF
OTHER MODELS THAT WILL WORK WITH YOUR
RADIO.
DIN CABLE (SUPPLIED
WITH CD CHANGER).
OPTIONAL CD CHANGER
6
COMP AC T
8-PIN DIN SOCKET FOR CONNECTION TO
OPTIONAL CD CHANGER
4-PINPLUGS
LEFT FRONT SPEAKER
SEE PAGE 4 FOR
RADIO WIRING
RIGHT FRONT SPEAKER
WHITE w/BLACK STRIPE
GRAYw/BLACKSTRIPE
WHITE
GREEN
GRAY
VIOLET
GREEN w/BLACK STRIPE
VIOLET w/BLACK STRIPE
HELP!
LEFT REAR SPEAKER
Monday - Friday 8:30am - 7:00pm Eastern
Saturday
9:00am - 5:00pm Eastern
1-800-645-4994
RIGHTREARSPEAKER
5
5 Page 
accidentally damaged ( will appear on the circumstances as it will erase the time
display panel to indicate that a disc is and pre-set memories:
btloaded in the player). Play of the disc can 1.Upon initial installation after all wiring is
be resumed by using the MODE button
completed.
ctto choose the CD player function.
2.If there is a malfunction of any of the
TIME/FREQUENCY SELECTOR (T/F) switches on the unit, pressing the RESET
During radio operation, press this button to button may clear the system and return
call the time display on the incorporated to normal operation.
dnquartz clock. The current time will appear
together with an A or P indication. The
FRONT PANEL RELEASE BUTTON
display will return to the radio frequency
(OPEN)
indication after 5 seconds.
This button is used to release the
During disc play press of this button to call mechanism that holds the front panel to the
the time display. The display will return to chassis. To detach the front panel, press
the disc indication after 5 seconds.
the button so that the panel drops to the
cu EQUALIZER BUTTON (P.EQ)
lowered position. Grasp the panel at the
middle, press the RELEASE bar, and pull it
The P.EQ button applies preset sound effects off of the chassis. To re-attach the panel,
to the unit’s audio output signal.The P.EQ press it straight onto the chassis until the
button, when pressed, will activate one of mechanism locks it into place.
dothe following operating modes (CLASSICS,
POP M, JAZZ, DSP OFF or FLAT). Even
REMOTE SENSOR
though the Equalizer function is active, as The sensor to detect the infrared signal from
displayed on the panel, if the bass and/or the wireless remote control is located behind
treble level is set, the Equalizer function the VFD display lens. For optimum operation
automatically returns to the FLAT mode. of the remote control, always aim the control
Conversely, when the Equalizer function is at the VFD display.
not active, the unit returns to the user set
bass and treble levels.
dl THEFT-DETERRENT LED
NOTES ON USE OF FRONT PANEL:
1.Make sure the front panel is positioned
Located on the chassis behind the front
panel, a light-emitting diode (LED) will flash
when the panel is physically removed. The
flashing light serves as a visual warning to
correctly when attaching it to the chassis
as it cannot be attached when up-side
down. Use moderate pressure to fully
seat the panel into position.
the would-be thief that the unit has been 2.To verify correct panel installation, swing
disabled by removal of the front panel.
dm RESET BUTTON
The RESET button is located to the right of
the panel assembly up into position until
it locks easily into place. If any resistance
11is encountered, re-check panel
orientation in chassis mounting plate.
the theft deterrent LED. The reset circuitry
should only be activated under the following
11 Page | ||
| Páginas | Total 24 Páginas | |
| PDF Descargar | [ Datasheet ACD-94.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ACD-94 | AM/FM/MPX Radio | audiovox |
| ACD-95 | AM/FM/MPX Radio | audiovox |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |