|
|
PDF GRF180 Data sheet ( Hoja de datos )
| Número de pieza | GRF180 | |
| Descripción | SURFACE MOUNT / MAGNETIC-LATCHING BROADBAND RF RELAYS DPDT | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GRF180 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
SURFACE MOUNT,
MAGNETIC-LATCHING
BROADBAND
RF RELAYS
DPDT
SERIES
GRF180
DESCRIPTION
The Series GRF180 relay is the first hermetically sealed,
ultraminiature RF relay designed from inception for surface
mount applications. This magnetic-latching relay features
extremely low internal circuit losses for exceptional time and
frequency domain response characteristics through and
beyond the UHF spectrum and into the S band. The GRF180
features a unique ground shield that isolates and shields
each lead to ensure excellent contact-to-contact and pole-to-
pole isolation. This ground shield provides a ground interface
that results in improved high-frequency performance as well
as parametric repeatability. The GRF180 extends
performance advantages over similar RF devices that simply
offer formed leads for surface mounting.
The GRF180 is robust to shock, vibration and temperature
extremes for use in space applications and other demanding
environments. It is engineered for use in RF attenuators, RF
switch matrices, automated test equipment, spacecraft and
other applications that require dependable high-frequency
signal fidelity and performance. Its low profile and .100" grid
spaced terminals make the GRF180 ideal for applications
where extreme packaging density and/or close PC board
spacing are required.
Unique features and manufacturing techniques include:
• Positive mounting means to RF ground plane.
• Unique uniframe design provides high magnetic efficiency
and mechanical rigidity.
• High force/mass ratios for resistance to shock and
vibration.
• Advanced cleaning techniques provide maximum
assurance of internal cleanliness.
• Gold-plated precious metal alloy contacts ensure reliable dc
and RF signal switching, as well as low and stable insertion
loss.
• Robust to high temperature solder reflow environments.
PRINCIPLE OF OPERATION
Energizing Coil A produces a
PERMANENT MAGNET
MAGNETIC CIRCUIT A
magnetic field opposing the MAGNETIC CIRCUIT B
magnetic field of the
SOFT IRON CORE A
SOFT IRON FRAME
permanent magnet in Circuit
A. As the net holding force
COIL B
COIL A
decreases, the attractive
force in the air gap of Circuit
B, which also results from the
magnetic field of the
AIR GAP
STATIONARY
CONTACT
permanent magnet, becomes
great enough to break the
armature free of Core A, and
ARMATURE
MOVING
CONTACT
snap it into a closed position against Core B. The armature remains in this
position upon removal of power from Coil A, but will snap back into position
A upon energizing Coil B. Since operation depends upon cancellation of a
magnetic field, it is necessary to apply the correct polarity to the relay coils
as indicated on the relay schematic.
When latching relays are installed in equipment, the latch and reset coils
should not be pulsed simultaneously. Coils should not be pulsed with less
than rated coil voltage and the pulse width should be a minimum of three
times the specified operate time of the relay. If these conditions are not
followed, it is possible for the relay to be in the magnetic neutral position.
ENVIRONMENTAL AND
PHYSICAL SPECIFICATIONS
Temperature Storage –65°C to +125°C
(Ambient)
Operating –55°C to +85°C
Vibration
(General Note 1)
30 g’s to 500 Hz
Shock
(General Note 1)
100 g’s,
6 msec, half-sine
Enclosure
Hermetically sealed
Weight
0.10 oz. (2.9g) max.
©2003 TELEDYNE RELAYS
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
GRF180 Page 12
GRF180/1203/Q1
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet GRF180.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GRF180 | SURFACE MOUNT / MAGNETIC-LATCHING BROADBAND RF RELAYS DPDT | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |