Datenblatt-pdf.com


8841-N2 Schematic ( PDF Datasheet ) - NXP Semiconductors

Teilenummer 8841-N2
Beschreibung TDA8841-N2
Hersteller NXP Semiconductors
Logo NXP Semiconductors Logo 




Gesamt 68 Seiten
8841-N2 Datasheet, Funktion
www.DataSheet4U.com
INTEGRATED CIRCUITS
DEVICE SPECIFICATION
TDA884X/5X-N2 series
I2C-bus controlled
PAL/NTSC/SECAM TV processors
Tentative Device Specification
December 16, 1997
Previous version: April 24, 1997
Philips Semiconductors






8841-N2 Datasheet, Funktion
Philips Semiconductors
wIw2wC.D-abtauShseect4oU.ncotmrolled PAL/NTSC/SECAM TV
processors
Tentative Device Specification
TDA884X/5X-N2 series
December 16, 1997
6

6 Page









8841-N2 pdf, datenblatt
Philips Semiconductors
wIw2wC.D-abtauShseect4oU.ncotmrolled PAL/NTSC/SECAM TV
processors
Tentative Device Specification
TDA884X/5X-N2 series
FUNCTIONAL DESCRIPTION
Vision IF amplifier
The IF-amplifier contains 3 ac-coupled control stages with
a total gain control range which is higher then 66 dB. The
sensitivity of the circuit is comparable with that of modern
IF-IC’s.
The video signal is demodulated by means of an
alignment-free PLL carrier regenerator with an internal
VCO. This VCO is calibrated by means of a digital control
circuit which uses the X-tal frequency of the colour
decoder as a reference. The frequency setting for the
various standards (33.4, 33.9, 38, 38.9, 45.75 and 58.75
MHz) is realised via the I2C-bus. To get a good
performance for phase modulated carrier signals the
control speed of the PLL can be increased by means of the
FFI bit.
The AFC output is generated by the digital control circuit of
the IF-PLL demodulator and can be read via the I2C-bus.
For fast search tuning systems the window of the AFC can
be increased with a factor 3. The setting is realised with the
AFW bit. The AFC data is valid only when the horizontal
PLL is in lock (SL = 1)
Depending on the type the AGC-detector operates on
top-sync level (single standard versions) or on top sync
and top white- level (multi standard versions). The
demodulation polarity is switched via the I2C-bus. The
AGC detector time-constant capacitor is connected
externally. This mainly because of the flexibility of the
application. The time-constant of the AGC system during
positive modulation is rather long to avoid visible variations
of the signal amplitude. To improve the speed of the AGC
system a circuit has been included which detects whether
the AGC detector is activated every frame period. When
during 3 field periods no action is detected the speed of the
system is increased. For signals without peak white
information the system switches automatically to a gated
black level AGC. Because a black level clamp pulse is
required for this way of operation the circuit will only switch
to black level AGC in the internal mode.
The circuits contain a video identification circuit which is
independent of the synchronisation circuit. Therefore
search tuning is possible when the display section of the
receiver is used as a monitor. However, this ident circuit
cannot be made as sensitive as the slower sync ident
circuit (SL) and we recommend to use both ident outputs
to obtain a reliable search system. The ident output is
supplied to the tuning system via the I2C-bus.
The input of the identification circuit is connected to pin 13
(S-DIP 56 devices), the “internal” CVBS input (see Fig.6).
This has the advantage that the ident circuit can also be
made operative when a scrambled signal is received
(descrambler connected between pin 6 (IF video output)
and pin 13). A second advantage is that the ident circuit
can be used when the IF amplifier is not used (e.g. with
built-in satellite tuners).
The video ident circuit can also be used to identify the
selected CBVS or Y/C signal. The switching between the
2 modes can be realised with the VIM bit.
IDENT
VIM
TO LUMA/SYNC PROCESSING
TO CHROMA PROCESSING
VIDEO IDENT
+
+
December 16, 1997
13(24)
17(29)
11(21) 10(20) 38(54)
(26)
CVBS-INT CVBS-EXT Y/CVBS-3 C
Fig.6 CVBS switch and interfacing of video ident
12
CVBS-1
OUT
CVBS-2
OUT

12 Page





SeitenGesamt 68 Seiten
PDF Download[ 8841-N2 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
8841-N2TDA8841-N2NXP Semiconductors
NXP Semiconductors

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche