Datenblatt-pdf.com


DGP12U5S5 Schematic ( PDF Datasheet ) - Power-One

Teilenummer DGP12U5S5
Beschreibung SINGLE OUTPUT
Hersteller Power-One
Logo Power-One Logo 




Gesamt 3 Seiten
DGP12U5S5 Datasheet, Funktion
DGP12 SERIES
DUAL OUTPUT
DESCRIPTION
The dual output DGP12 Series provides symmetrical +/– outputs
from 5 volts to 15 volts in packages that provide power densities
up to 7 watts per cubic inch (0.43 watts per cm3). Designed to
operate on ultra-wide input voltages from 3.5 to 16 volts, and
with remote ON/OFF capability, the DGP12 supplies power from
battery or system sources . The fully isolated, shielded case allows
precise operation in sensitive environments.
FEATURES
• Remote ON/OFF and TRIM
• Five-Side Shielded Copper Case
• Typical Efficiency up to 78%
• Fully Isolated and Filtered
• 700V Isolation
• Ultra Wide Range Input (4:1)
1.100
(27.94)
0.700
(17.78)
0.600
(15.24)
0.400
(10.16)
0.300
(7.62)
0.000
0.100
(2.54)
0.51
(13.0)
1
2
3
BOTTOM VIEW
2.02
(51.31)
SIDE VIEW
0.040 (1.02) DIA
7 PLACES
4
5
2.02
(51.31)
6
7
Mechanical tolerances unless otherwise noted:
X.XX dimensions: ±0.020 inches
X.XXX dimensions: ±0.005 inches
NOTES
(1) All parameters measured at Tc = 25°C, nominal input voltage and full rated load unless otherwise noted.
Refer to the Technical Reference Section for the definition of terms, measurement circuits and other
information.
(2) See the DGP12 Series Application Notes for more information on applying the ON/OFF pin.
(3) The Case is tied to the -Input pin.
(4) The functional temperature range is intended to give an additional data point for use in evaluating this
power supply. At the low functional temperature the power supply will function with no side effects,
however, sustained operation at the high functional temperature will reduce expected operational life.
The data sheet specifications are not guaranteed beyond the case operating range.
(5) The case thermal impedance is specified as the case temperature rise over ambient per package watt
dissipated.
(6) Output power is reduced at 3.5V input. See DGP12 Series Application Notes for specific
Derating guidelines
NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments,
or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are
subject to change without notice.
Rev. 04/2000
1





SeitenGesamt 3 Seiten
PDF Download[ DGP12U5S5 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
DGP12U5S12SINGLE OUTPUTPower-One
Power-One
DGP12U5S15SINGLE OUTPUTPower-One
Power-One
DGP12U5S5SINGLE OUTPUTPower-One
Power-One

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche