Datenblatt-pdf.com


DG406 Schematic ( PDF Datasheet ) - Intersil Corporation

Teilenummer DG406
Beschreibung Single 16-Channel/Differential 8-Channel / CMOS Analog Multiplexers
Hersteller Intersil Corporation
Logo Intersil Corporation Logo 




Gesamt 15 Seiten
DG406 Datasheet, Funktion
Single 16-Channel/Differential 8-Channel, CMOS
Analog Multiplexers
DG406, DG407
The DG406 and DG407 monolithic CMOS analog multiplexers
are drop-in replacements for the popular DG506A and DG507A
series devices. They each include an array of sixteen analog
switches, a TTL and CMOS compatible digital decode circuit for
channel selection, a voltage reference for logic thresholds, and
an ENABLE input for device selection when several multiplexers
are present.
These multiplexers feature lower signal ON-resistance (<100Ω)
and faster transition time (tTRANS < 300ns) compared to the
DG506A and DG507A. Charge injection has been reduced,
simplifying sample and hold applications.
The improvements in the DG406 series are made possible by
using a high voltage silicon-gate process. An epitaxial layer
prevents the latch-up associated with older CMOS technologies.
The 44V maximum voltage range permits controlling 30VP-P
signals when operating with ±15V power supplies.
The sixteen switches are bilateral, equally matched for AC or
bidirectional signals. The ON-resistance variation with analog
signals is quite low over a ±5V analog input range.
Features
• ON-Resistance (Max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100Ω
• Low Power Consumption (PD) . . . . . . . . . . . . . . . . . . <1.2mW
• Fast Transition Time (Max) . . . . . . . . . . . . . . . . . . . . . . . 300ns
• Low Charge Injection
• TTL, CMOS Compatible
• Single or Split Supply Operation
• Pb-Free (RoHS Compliant)
Applications
• Battery Operated Systems
• Data Acquisition
• Medical Instrumentation
• Hi-Rel Systems
• Communication Systems
• Automatic Test Equipment
Related Literature
• Technical Brief TB363 “Guidelines for Handling and Processing
Moisture Sensitive Surface Mount Devices (SMDs)”
ANALOG
INPUTS
DG406
MUX
BUFFER
ADC
CPU
FIGURE 1. TYPICAL APPLICATION
80
70
+125°C
60
+85°C
50
+25°C
40
0°C
30 -40°C
20 -55°C
10 V+ = 15V
V- = -15V
0
-15 -10
-5
0
5 10
VD , DRAIN VOLTAGE (V)
FIGURE 2. ±15 DUAL SUPPLY rON CURVES AT VARIOUS
TEMPERATURES
15
October 1, 2013
FN3116.11
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2000, 2004, 2006, 2009, 2013. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.






DG406 Datasheet, Funktion
DG406, DG407
Electrical Specifications Test Conditions: V+ = +15V, V- = -15V, VAL = 0.8V, VAH = 2.4V Unless Otherwise Specified. Bold-face limits
apply over the operating temperature range, -40°C to +85°C. (Continued)
PARAMETER
Source OFF Leakage Current, IS(OFF)
Drain OFF Leakage Current, ID(OFF)
DG406
DG407
Drain ON Leakage Current, ID(ON)
DG406
DG407
POWER SUPPLY CHARACTERISTICS
Positive Supply Current, I+
Negative Supply Current, I-
Positive Supply Current, I+
Negative Supply Current, I-
TEST CONDITIONS
VEN = 0V, VS = ±10V,
VD = +10V
VS = VD = ±10V (Note 9)
VEN = VA = 0V or 5V
(Standby)
VEN = 2.4V, VA = 0V
(Enabled)
TEMP
(°C)
25
Full
MIN
(Notes 7, 12)
-0.5
-5
TYP
(Note 8)
0.01
-
MAX
(Notes 7, 12)
0.5
5
UNITS
nA
nA
25 -1
Full -40
25 -1
Full -20
0.04
-
0.04
-
1 nA
40 nA
1 nA
20 nA
25 -1
Full -40
25 -1
Full -20
0.04
-
0.04
-
1 nA
40 nA
1 nA
20 nA
25 -
Full -
25 -1
Full -10
25 -
Full -
25 -1
Full -10
13
-
-0.01
-
80
-
-0.01
-
30 µA
75 µA
- µA
- µA
100 µA
200 µA
- µA
- µA
Electrical SpecificationsMSingle Supply Test Conditions: V+ = 12V, V- = 0V, VAL = 0.8V, VAH = 2.4V,
Unless Otherwise Specified.
PARAMETER
TEST
CONDITIONS
TEMP
(°C)
MIN
(Notes 7, 12)
TYP
(Note 8)
DYNAMIC CHARACTERISTICS
Switching Time of Multiplexer, tTRANS
VS1 = 8V, VS8 = 0V, VIN = 2.4V
25
-
300
Enable Turn-ON Time, tON(EN)
VINH = 2.4V, VINL = 0V,
25
-
250
Enable Turn-OFF Time, tOFF(EN)
VS1 = 5V
25 - 150
Charge Injection, Q
CL = 1nF, VS = 6V, RS = 0Ω
25
-
20
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, VANALOG
Full 0
-
Drain-Source ON-Resistance,
rDS(ON)
VD = 3V, 10V, IS = -1mA
(Note 9)
25
-
90
rDS(ON) Matching Between
Channels (Note 6), ΔrDS(ON)
25 -
5
Source Off Leakage Current,IS(OFF)
VEN = 0V, VD = 10V or 0.5V,
25
-
0.01
Drain Off Leakage Current, ID(OFF)
VS = 0.5V or 10V
DG406
25 - 0.04
DG407
25 - 0.04
MAX
(Notes 7, 12)
UNITS
450 ns
600 ns
300 ns
- pC
12 V
120 Ω
-%
- nA
- nA
- nA
6 FN3116.11
October 1, 2013

6 Page









DG406 pdf, datenblatt
DG406, DG407
Die Characteristics
DIE DIMENSIONS:
2490µm x 4560µm x 485µm
METALLIZATION:
Type: SiAl
Thickness: 12kÅ ±1kÅ
Metallization Mask Layout
PASSIVATION:
Type: Nitride
Thickness: 8kÅ ±1kÅ
WORST CASE CURRENT DENSITY:
9.1 x 104 A/cm2
DG406
NC
V+ D
V-
S16 S5
S15 S7
S14 S6
S13 S5
S12 S4
S11 S3
S10 S2
S9 S1
GND A3
A2 A1
A0 EN
12
FN3116.11
October 1, 2013

12 Page





SeitenGesamt 15 Seiten
PDF Download[ DG406 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
DG4000Function/Arbitrary Waveform Generator Guide ManualRIGOL
RIGOL
DG401Monolithic CMOS Analog SwitchesIntersil Corporation
Intersil Corporation
DG401Improved / Dual / High-Speed Analog SwitchesMaxim Integrated
Maxim Integrated
DG402Low Power High SPeed CMOS Analog SwitchETC
ETC
DG403Improved / Dual / High-Speed Analog SwitchesMaxim Integrated
Maxim Integrated

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche