Datenblatt-pdf.com


DFM600FXM18-A000 Schematic ( PDF Datasheet ) - Dynex

Teilenummer DFM600FXM18-A000
Beschreibung Fast Recovery Diode Module
Hersteller Dynex
Logo Dynex Logo 




Gesamt 6 Seiten
DFM600FXM18-A000 Datasheet, Funktion
Replaces DS5438-1.4
DFM600FXM18-A000
Fast Recovery Diode Module
DS5438-2 April 2010 (LN26762)
FEATURES
Low Reverse Recovery Charge
High Switching Speed
Low Forward Volt Drop
Isolated AlSiC Base with AlN Substrates
Dual Diodes can be paralleled for 1200A Rating
Lead Free Construction
KEY PARAMETERS
VRRM
VF
IF
IFM
(typ)
(max)
(max)
1800V
2.0V
600A
1200A
1(K) 2(K)
APPLICATIONS
Chopper Diodes
Boost and Buck Circuits
Free-wheel Circuits
Multi-level Switch Inverters
The DFM600FXM18-A000 is a dual 1800V, fast
recovery diode (FRD) module. Designed for low
power loss, the module is suitable for a variety of high
voltage applications in motor drives and power
conversion.
Fast switching times and low reverse recovery losses
allow high frequency operation, making the device
suitable for the latest drive designs employing PWM
and high frequency switching.
The module incorporates an electrically isolated base
plate and low inductance construction enabling circuit
designers to optimise circuit layouts and utilise
grounded heat sinks for safety.
3(A) 4(A)
External connection required for a single 1200A diode
Fig. 1 Circuit configuration
ORDERING INFORMATION
Order As:
DFM600FXM18-A000
Note: When ordering, please use the complete part
number
Outline type code: F
(See Fig. 7 for further information)
Fig. 2 Package
www.dynexsemi.com
1/6






DFM600FXM18-A000 Datasheet, Funktion
DFM600FXM18-A000
HEADQUARTERS OPERATIONS
DYNEX SEMICONDUCTOR LTD
Doddington Road, Lincoln
Lincolnshire, LN6 3LF, United Kingdom
Fax:
Tel:
+44(0)1522 500550
+44(0)1522 500500
CUSTOMER SERVICE
DYNEX SEMICONDUCTOR LTD
Doddington Road, Lincoln
Lincolnshire, LN6 3LF, United Kingdom
Fax:
Tel:
+44(0)1522 500020
+44(0)1522 502901 / 502753
Dynex Semiconductor TECHNICAL DOCUMENTATION NOT FOR RESALE. PRODUCED IN UNITED KINGDOM.
Datasheet Annotations: Dynex Semiconductor annotate datasheets in the top right hand corner of the front page, to indicate product status.
The annotations are as follows:-
Target Information:
This is the most tentative form of information and represents a very preliminary specification.
No actual work on the product has been started.
Preliminary Information:
The product is in design and development.
The datasheet represents the product as it is understood but may change.
Advance Information:
The product design is complete and final characterisation for volume production is well in hand.
No Annotation:
The product parameters are fixed and the product is available to datasheet specification.
This publication is issued to provide information only which (unless agreed by the company in writing) may not be used, appli ed or reproduced for any purpose nor form part of any order or
contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee expressed or implied is made regarding the capability, performance or
suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible
methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the users responsibility to
fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These
products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided
subject to the Company’s conditions of sale, which are available on request.
All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.
6/6
www.dynexsemi.com

6 Page







SeitenGesamt 6 Seiten
PDF Download[ DFM600FXM18-A000 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
DFM600FXM18-A000Fast Recovery Diode ModuleDynex
Dynex

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche