|
|
Teilenummer | DF7-5EP-3.96DSA |
|
Beschreibung | 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL /C-UL and TUV Listed) | |
Hersteller | Hirose | |
Logo | ||
Gesamt 16 Seiten 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)
DF7 Series
Complete
Locking
Function
Prevention of
Incorrect Connections
Completely
enclosed
locking system
Full barrier
between adjacent
contacts.
sFeatures
1. Complete Locking Function
Reliable interior lock protects mated connectors from
accidental disconnection.
2. Increased Contact Retention of Crimped
Contacts and Prevention of Incomplete
Insertion
Separate contact retainer increases the contact
retention, assures and visually confirms the complete
contact insertion.
3. Molded-in Contact Retention Tabs
Handling of terminated contacts during the assembly and
termination is easier and avoids entangling of wires,
since there are no protruding metal tabs.
4. Incorrect Insertion Prevention
Connectors are polarized to assure correct mating with
corresponding parts.
5.Solder Crack Prevention
Glass reinforced resin is used in the pin header bodies to
prevent solder cracks caused by the heat shrinkage.
6. Prevention of Incorrect Board Placement
Built-in locating posts assure correct connector
placement and orientation on the board.(2-12 pos.)
7. Supports Sealing after Installation.
Sealing compound can be applied to the board installed
connector for distance of 6 mm max. from the mounting
surface (9 mm max. for single position).
8.Cost Effective Tooling
The same crimping tools are used to terminate socket
and pin contacts.
9. Prevention of Short Circuits between
Adjacent Contacts
Each contact is completely surrounded by the insulator
housing, electrically isolating it from adjacent contacts.
Guide post
Board Eyelet mounting
One pos. type can also be mounted
to boards that have eyelets.
Continued.
2004.7
1
s In-line plug (Panel lock type)
Shown with terminated
and installed contacts.
Shown with terminated
and installed contacts.
1 Pos.
1 Pos.
Part Number
DF7- 1EP-3.96C
DF7- 2EP-3.96C
DF7- 3EP-3.96C
DF7- 4EP-3.96C
DF7- 5EP-3.96C
DF7- 6EP-3.96C
DF7- 7EP-3.96C
DF7- 8EP-3.96C
DF7- 9EP-3.96C
DF7-10EP-3.96C
CL No.
CL680-0134-4
CL680-0018-3
CL680-0019-6
CL680-0020-5
CL680-0021-8
CL680-0022-0
CL680-0023-3
CL680-0024-6
CL680-0025-9
CL680-0026-1
Number of contacts
1
2
3
4
5
6
7
8
9
10
A
6.44
10.40
14.36
18.32
22.28
26.24
30.20
34.16
38.12
42.08
B
-------------
3.96
7.92
11.88
15.84
19.80
23.76
27.72
31.68
35.64
Note1: Bag packaging (100 pieces/bag). Order by number of bags.
Note2: Refer to page 10 for retainer.
2 to 10 Pos.
12.44
6.44
2 to 10 Pos.
3
P=3.96
A
B
3
C
13.96
17.40
21.36
25.32
29.28
33.24
37.20
41.16
45.12
49.08
A1
Cavity No.
No. of contacts indicator
A1
No. of contacts
indicator
10
9.5
Cavity No.
B
Contact No.1
indicator
13.96
B Panel Cutout
1 Pos.
(11.32+X)+00.1
6.84+00.1
2.0
1.6
1.2
0.8
6
X
1.44
0.96
0.48
0
Y
0.88
0.96
1.44
1.92
C
2 to 10 Pos.
(C-Y)+00.1
(A+0.4)+00.1
10±0.2
6 Page s Double-row Socket
A
B
P=3.96
(17.2)
Contact No.1
Cavity No.
1
2
A
9
10
No. of contacts indicator
Part Number
CL No.
Number of contacts A
B
DF7A-4DS-3.96C CL680-0160-4 4 10.00 3.96
DF7A-6DS-3.96C CL680-0161-7 6 13.96 7.92
DF7A-8DS-3.96C CL680-0162-0 8 17.92 11.88
DF7A-10DS-3.96C CL680-0163-2
10
21.88 15.84
DF7A-12DS-3.96C CL680-0164-5
12
25.84 19.80
Note: Bag packaging (100 pieces/bag). Order by number of bags.
12
12 Page | ||
Seiten | Gesamt 16 Seiten | |
PDF Download | [ DF7-5EP-3.96DSA Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
DF7-5EP-3.96DS | 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL /C-UL and TUV Listed) | Hirose |
DF7-5EP-3.96DSA | 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL /C-UL and TUV Listed) | Hirose |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |