Datenblatt-pdf.com


P4SMAJ7.0 Schematic ( PDF Datasheet ) - Pan Jit International

Teilenummer P4SMAJ7.0
Beschreibung SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 400 Watt Peak Power Pulse)
Hersteller Pan Jit International
Logo Pan Jit International Logo 




Gesamt 4 Seiten
P4SMAJ7.0 Datasheet, Funktion
Approve Sheet Part Number: P4SMAJ SERIES
3.DATA SHEET
P4SMAJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 5.0 to 220 Volts 400 Watt Peak Power Pulse
SMA / DO-214AC
Unit: inch ( mm )
FEATURES
• For surface mounted applications in order to optimize board space.
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Excellent clamping capability
• Low inductance
• Fast response time: typically less than 1.0 ps from 0 volts to BV min
• Typical IR less than 1µA above 10V
• High temperature soldering : 250°C/10 seconds at terminals.
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
.181 (4.60)
.157 (4.00)
.012 (.305)
.006 (.152)
MECHANICAL DATA
Case: JEDEC DO-214AC low profile molded plastic
Terminals: Solder leads, solderable per MIL-STD-750, Method 2026
Polarity: Indicated by cathode band except Bi-directional types.
Standard Packageing: 12mm tape per(EIA-481)
Weight: 0.002 ounces, 0.064 gram
.060 (1.52)
.030 (0.76)
.008(.203)
.002(.051)
.208 (5.28)
.188 (4.80)
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
RATING
Peak Power Dissipation at TA=25°C, TP=1ms(Note 1,2,5)Fig.1
Peak Forward Surge Current, per Figure 5(Note 3)
Peak Pulse Current Current on 10/1000µs waveform(Note 1,2,5)Fig.2
Steady State Power Dissipation(Note 4)
Operating and Storage Temperature Range
SYMBOL
PPPM
IFSM
IPPM
PM(AV)
TJ, TSTG
VALUE
Minimum 400
40.0
See Table 1
1.0
-55 to +150
UNITS
Watts
Amps
Amps
Watts
°C
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25°Cper Fig. 2.
2.Mounted on 5.0mm2 Copper pads to each terminal.
3.8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
4.lead temperature at 75°C=TL.
5.Peak pluse power waveformis 10/1000µS.
PAGE . 3





SeitenGesamt 4 Seiten
PDF Download[ P4SMAJ7.0 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
P4SMAJ7.0SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 400 Watt Peak Power Pulse)Pan Jit International
Pan Jit International
P4SMAJ7.0SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0-170VoltsSurge Components
Surge Components
P4SMAJ7.0TVS Diode, SMD (Transient Voltage Suppressor)TRSYS
TRSYS
P4SMAJ7.0Surface Mount unidirectional and bidirectional Transient Voltage Suppressor DiodesDiotec Semiconductor
Diotec Semiconductor
P4SMAJ7.0Surface Mount unidirectional and bidirectional Transient Voltage Suppressor DiodesDiotec Semiconductor
Diotec Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche