|
|
Número de pieza | PS9711-F4 | |
Descripción | HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps / TOTEM-POLE OUTPUT TYPE 5-PIN SOP TOM PHOTOCOUPLER | |
Fabricantes | NEC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PS9711-F4 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! DATA SHEET
PHOTOCOUPLER
PS9711
HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE
5-PIN SOP TOM PHOTOCOUPLER
−NEPOCTM Series−
DESCRIPTION
The PS9711 is an optically coupled high-speed, totem-pole output isolator containing a GaAlAs LED on light
emitting diode (input) and a photodiode and a signal processing circuit on light receiving side (output side) on one
chip.
FEATURES
• High common mode transient immunity (CMH, CML = ±10 kV/µs TYP.)
• Small package (5-pin SOP)
• High-speed response (tPHL = 30 ns, tPLH = 35 ns TYP.)
• Pulse width distortion (tPHL – tPLH = 7 ns TYP.)
• Totem-pole output (No pull-up resistor required)
• Ordering number of taping product: PS9711-E3, E4: 900 pcs/reel,
PS9711-F3, F4 (Recommended): 3 500 pcs/reel
APPLICATIONS
• Computer and peripheral manufactures
• Measurement equipment
• PDP
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P13103EJ3V0DS00 (3rd edition)
Date Published February 2000 NS CP(K)
Printed in Japan
The mark • shows major revised points.
©
1997, 2000
1 page PS9711
*1 Typical values at TA = 25 °C
*2 Test circuit for propagation delay time
Pulse input (IF)
(PW = 500 ns,
Duty cycle = 1/2)
VCC = 5 V
VCC 0.1 µ F
VCC = 5 V
VO (monitor)
Input
1.3 kΩ
Input
(monitor)
CL = 15 pF
47 Ω
GND
CL =
30 pF 2.5 kΩ
Output
tPHL
IF (ON)
50 % IF (ON)
VOH
1.5 V
tPLH
VOL
CL is approximately which includes probe and stray wiring capacitance.
*3 Test circuit for common mode transient immunity
GL SW IF
VCC
GND
0.1 µF
VCC = 5 V
VO (Monitor)
CL = 15 pF
VCM 90 %
10 %
tr
VO
(IF = 0 mA)
VO
(IF = 7.5 mA)
CL is approximately which includes probe and stray wiring capacitance.
tf
100 V
0V
VOH
2V
0.8 V
VOL
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of more than 0.1 µF is used between VCC and GND near device.
Data Sheet P13103EJ3V0DS00
5
5 Page [MEMO]
PS9711
Data Sheet P13103EJ3V0DS00
11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet PS9711-F4.PDF ] |
Número de pieza | Descripción | Fabricantes |
PS9711-F3 | HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps / TOTEM-POLE OUTPUT TYPE 5-PIN SOP TOM PHOTOCOUPLER | NEC |
PS9711-F4 | HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps / TOTEM-POLE OUTPUT TYPE 5-PIN SOP TOM PHOTOCOUPLER | NEC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |