|
|
Número de pieza | PM8355 | |
Descripción | 4-Channel 2.125 / 2.5 and 3.125 Gbit/s Transceiver with Half-rate Support | |
Fabricantes | PMC-Sierra | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PM8355 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Advance
PM8355
QuadPHY-II™
4-Channel 2.125, 2.5 and 3.125 Gbit/s Transceiver with Half-rate Support
GENERAL DESCRIPTION
The QuadPHY-II is a physical layer
transceiver ideal for systems requiring
high speed point-to-point communi-
cation links. It is applicable for PMA-
PMD connections in 10 GE, Infiniband 1
or 4 x 2.5 Gbit/s links, 1 and 2 Gbit/s
Fibre Channel, as well as high speed
serial backplanes for high capacity
systems.
FEATURES
GENERAL
• 10Gbit/s, bi-directional, XAUI to XGMII
link supporting the proposed IEEE
802.3ae (the standard is draft and is
subject to change).
• Four independent 2.125, 2.5 and 3.125
Gbit/s Serdes for Fibre Channel,
Infiniband, 10 GE line cards and high-
speed backplane applications.
• Half/Full rate mode selectable per
channel.
• Integrated serializer/ deserializer, clock
synthesis, clock recovery and 8B/10B
encode/decode logic.
• Under 2 Watts typical power.
SERIAL I/O
• Redundant high speed serial I/O
channels for convenient switching to
redundant fabric.
• High speed outputs with optional pre-
emphasis to drive longer backplanes.
• High speed I/O with on-chip
termination resistors to directly drive
dual-terminated 50 Ohm lines.
PARALLEL I/O
• 10-bit Dual Data Rate (DDR) parallel
interface.
• Selectable source simultaneous or
source synchronous transmit and
receive parallel interfaces.
• Convenient output clock for user
friendly ASIC timing.
• Interoperates with SSTL2 and 1.8V
LVCMOS standard.
TRUNKING &TIMING
• Integrated Receive FIFO synchronizes
incoming data to local clock domain.
• Trunking feature de-skews and aligns
all four channels to form a single 10
Gbit/s logical link.
TEST FEATURES
• Extensive control of loopback, BIST,
and operating modes via 802.3
compliant MDC/MDIO serial interface.
• On-chip packet generator/checker-
provides at-speed diagnostics.
• Built-in error counters per channel.
• Support for IEEE 1149.1 JTAG testing
on all pins.
PHYSICAL
• 1.8V, 0.18 micron standard CMOS
technology with 2.5V tolerant I/O.
• 289-ball PBGA (19mm x 19mm
package).
APPLICATIONS
• High speed serial backplanes
• 10 GE links
• Fibre Channel transceivers
• Infiniband transceivers
• XAUI retimers
• Intra-system interconnect
BLOCK DIAGRAM
TDOXP/
TDOXN
TDOYP/
TDOYN
(per channel)
2
2
Transmit Channel A (1 of 4)
10
Serializer
8B/10B Encoder
FIFO & /A/
insert
Adaptive
Sampler
Receive Channel A (1 of 4)
10B/8B Decoder
8 or 10
FIFO & Trunking
Logic
RDIXP/
RDIXN
RDIYP/
RDIYN
(per channel)
2
2
RESET,
MDC, MDIO
Mode strapping pins
JTAG interface
BIST pins
Clock Recovery
Deserialize & Byte
Align
Common Control Logic
Clock Synthesizer
TXD[9:0]
(per channel)
9 or 10
TXCLK
(shared)
RXD[9:0]
(per channel)
9 or 10
RXCLK
(per channel)
SYSCLK
(1x or 2x rate)
PMC-2000791 (A4)
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
© Copyright PMC-Sierra, Inc. 2001
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet PM8355.PDF ] |
Número de pieza | Descripción | Fabricantes |
PM8351 | 8-Channel 1.0-1.25 Gbps Transceiver | PMC-Sierra |
PM8353 | 4-Channel 1.0-1.25 Gbps Transceiver | PMC-Sierra |
PM8355 | 4-Channel 2.125 / 2.5 and 3.125 Gbit/s Transceiver with Half-rate Support | PMC-Sierra |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |