DataSheet.es    


PDF 86014012A Data sheet ( Hoja de datos )

Número de pieza 86014012A
Descripción High Speed Dual Comparator
Fabricantes National Semiconductor 
Logotipo National Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de 86014012A (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! 86014012A Hoja de datos, Descripción, Manual

May 1999
LM119/LM219/LM319
High Speed Dual Comparator
General Description
The LM119 series are precision high speed dual compara-
tors fabricated on a single monolithic chip. They are de-
signed to operate over a wide range of supply voltages down
to a single 5V logic supply and ground. Further, they have
higher gain and lower input currents than devices like the
LM710. The uncommitted collector of the output stage
makes the LM119 compatible with RTL, DTL and TTL as well
as capable of driving lamps and relays at currents up to 25
mA.
The LM319A offers improved precision over the standard
LM319, with tighter tolerances on offset voltage, offset cur-
rent, and voltage gain.
Features
n Two independent comparators
n Operates from a single 5V supply
n Typically 80 ns response time at ±15V
n Minimum fan-out of 2 each side
n Maximum input current of 1 µA over temperature
n Inputs and outputs can be isolated from system ground
n High common mode slew rate
Although designed primarily for applications requiring opera-
tion from digital logic supplies, the LM119 series are fully
specified for power supplies up to ±15V. It features faster re-
sponse than the LM111 at the expense of higher power dis-
sipation. However, the high speed, wide operating voltage
range and low package count make the LM119 much more
versatile than older devices like the LM711.
The LM119 is specified from −55˚C to +125˚C, the LM219 is
specified from −25˚C to +85˚C, and the LM319A and LM319
are specified from 0˚C to +70˚C.
Connection Diagram
Dual-In-Line Package
DS005705-4
Note 1: Also available per SMD# 8601401 or JM38510/10306
Top View
Order Number LM119J, LM119J/883 (Note 1),
LM219J, LM319J, LM319AM, LM319M,
LM319AN or LM319N
See NS Package Number J14A, M14A or N14A
© 1999 National Semiconductor Corporation DS005705
www.national.com

1 page




86014012A pdf
Typical Performance Characteristics LM119A/LM119/LM219 (Continued)
Supply Current
Supply Current
Output Limiting
Characteristics
DS005705-19
DS005705-20
Typical Performance Characteristics LM319A, LM319
Input Currents
Supply Currents
Transfer Function
DS005705-21
DS005705-22
DS005705-23
Response Time for Various
Input Overdrives
Response Time for Various
Input Overdrives
Input Characteristics
DS005705-24
DS005705-25
DS005705-26
DS005705-27
5 www.national.com

5 Page





86014012A arduino
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Order Number LM119W/883, LM119WG/883
NS Package Number W10A, WG10A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
www.national.com
National Semiconductor
Europe
Fax: +49 (0) 1 80-530 85 86
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet 86014012A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
86014012AHigh Speed Dual ComparatorNational Semiconductor
National Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar