|
|
PDF PGB0010603MR Data sheet ( Hoja de datos )
| Número de pieza | PGB0010603MR | |
| Descripción | PGB Series 0603 Surface Mount ESD Suppressor | |
| Fabricantes | Littelfuse | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PGB0010603MR (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
PulseGuard® Suppressors
Polymeric ESD Suppressors
Next
Previous
PGB Series 0603 Surface Mount ESD Suppressor
Product Overview
PulseGuard ESD Suppressors help protect sensitive electronic
equipment against electrostatic discharge (ESD). They supplement the
on-chip protection of integrated circuitry and are best suited for low-
voltage, high-speed applications where low capacitance is important.
Data ports utilizing such high-speed protocols as USB 2.0, IEEE1394
and InfiniBandSM can benefit from this new technology.
PulseGuard suppressors use polymer composite materials to
suppress fast-rising ESD transients (as specified in IEC 61000-4-2
and MIL-STD-883C).
Features
• Ultra-low capacitance
• Low leakage current
• Fast response time
• Single line of protection
• Bi-directional
• Withstands multiple ESD strikes
• Standard EIA SOCM-1608 package
• Compatible with pick-and-place processes
• Available in 1,000 and 5,000 piece reels (EIA-RS481)
Typical Applications
• Servers
• Laptop/Desktop Computers
• Network Hardware
• Computer Peripherals
• Digital Cameras
• External Storage
Electrical Characteristics
Trigger Voltage1 ...................................................................1,000V, typical
Clamping Voltage1 ..................................................................150V, typical
Rated Voltage ........................................................................24VDC, max
Capacitance2 ................................................................................0.055 pF
Response Time1 ...............................................................................< 1 ns
Leakage Current3..............................................................................< 1nA
ESD Pulse Withstand............................................1,000 pulses, minimum
NOTES:
1. 8 kV direct discharge method, per IEC 61000-4-2.
2. Measured at 1 MHz.
3. Measured at 6 VDC. Testing at fast ESD pulse rates (1-20Hz) may cause
a change in leakage current performance (6µA, max).
Physical Specifications
Materials:
Body: Glass Epoxy
Terminations: Tin-Lead
Soldering Parameters:
Wave solder -- 260°C, 10 seconds maximum
Reflow solder -- 260°C, 30 seconds maximum
Operating Temperature Range:
-65°C to 125°C
Ordering Information
CATALOG NUMBER
PGB0010603MR
PGB0010603NR
PIECES PER REEL
1,000
5,000
Design Consideration
Because of the fast rise-time of the ESD transient, placement of
PulseGuard suppressors is a key design consideration. To achieve
optimal ESD suppression, the devices should be placed on the circuit
board as close to the source of the ESD transient as possible. Install
PulseGuard suppressors directly behind the connector so that they are
the first board-level circuit component encountered by the ESD transient.
They are connected from signal/data line to ground.
174 w w w . l i t t e l f u s e . c o m
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet PGB0010603MR.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PGB0010603MR | PGB Series 0603 Surface Mount ESD Suppressor | Littelfuse |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |