Datenblatt-pdf.com


PEB22811HV13 Schematic ( PDF Datasheet ) - Infineon Technologies AG

Teilenummer PEB22811HV13
Beschreibung ETHERNET OVER VDSL CHIPSET
Hersteller Infineon Technologies AG
Logo Infineon Technologies AG Logo 




Gesamt 2 Seiten
PEB22811HV13 Datasheet, Funktion
PRODUCT BRIEF
10BaseSTM is an innovative technology offering the
simplicity of Ethernet coupled with the high perfor-
mance of VDSL. Utilizing 10BaseS, a system deliv-
ers 10 Mbit/s, full duplex Ethernet over existing
copper wire infrastructure up to a distance of
4000 ft/1200 m. It simultaneously supports high
speed DATA transmission with POTS, ISDN or PBX
signaling, without disruption.
Ethernet MAC and PHY functionality are integrated
into Infineon’s 10BaseS chipset, achieving direct
connectivity with standard Ethernet physical layer
and switching devices. Its VDSL technology uses
frequency division duplexing and QAM modula-
tion to provide robust operation. Its spectral allo-
cation allows noise-free coexistence with other
xDSL technologies in the same bundle.
10BaseS is the best solution for distribution of
broadband services in MDU/MTU and hospitality
markets and the most suitable solution for broad-
band LAN extension applications.
10BaseSTM
Applications
No need for glue logic. Standard
Spectral allocation allows noise-
10BaseS, Ethernet over VDSL,
interfaces provide direct connection
free operation with xDSL, ISDN
CPE (Customer Premises Equip-
to Ethernet MAC and PHY devices
(2B1Q/4B3T), “Smartphone”
ment) or NIC (Network Interface Address filtering, self-learning and
digital PBX devices
Card)
aging up to 32 addresses
Transmit Notch filter, Scrambler,
Multiple Dwelling/Tenant Units
Internal buffering, back pressure
Reed-Solomon Forward Error
(MDU/MTU) networking
and IEEE 802.3x flow control
Correction (FEC) and
Hospitality networking
capabilities
Convolutional Interleaver with
Multi-building campus networking Configurable as Ethernet MAC for
internal SRAM
High speed industrial environment
direct operation with standard
Link watchdog combined with
network
Ethernet PHY in CPE or NIC
robust link configuration ensures
Fiber, broadband wireless and
Supports Ethernet SNMP MIB
link establishment
cable LAN extension
counters
Transmit power management
Features
Compatible with IEEE 802.3
Ethernet MII, RMII, SMII and
7 wire interfaces
Symmetric 10 or 100 Mbit/s
Ethernet speed at full duplex
Configurable as standard
Ethernet PHY for use in CPE or
NIC applications
MII Serial Management Interface
supports full access to all internal
registers and control of both local
Quadrature Amplitude Modulation
(QAM)
Frequency division duplexing
Symmetrical/asymmetrical line
rates from below 1 Mbit/s up to
25 Mbit/s
Delivers symmetrical 10 Mbit/s
payload up to a distance of
4000 ft/1200 m
Robust operation handles micro-
interruptions, impulse noise and
severely distorted lines
Low power consumption -
1.5 W including line driver
Power boost for extended reach
Power down mode with fast warm
start capability (< 100 ms)
Digitally Controlled Crystal Oscil-
lator (DCXO) for timing recovery
Embedded microcontroller for
stand-alone operation
JTAG for chip level and board
level testing
and remote devices
1 0 B a s e S TM
Ethernet over VDSL Chipset
PEF 22810 (VDSL-L)
PEB 22811 (VDSL-A)
PEF 22822 (10BaseS-D)
Never
stop
thinking.





SeitenGesamt 2 Seiten
PDF Download[ PEB22811HV13 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PEB22811HV13ETHERNET OVER VDSL CHIPSETInfineon Technologies AG
Infineon Technologies AG

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche