Datenblatt-pdf.com


EL1511C Schematic ( PDF Datasheet ) - Elantec

Teilenummer EL1511C
Beschreibung Medium Power Differential Line Driver
Hersteller Elantec
Logo Elantec Logo 




Gesamt 2 Seiten
EL1511C Datasheet, Funktion
EL1511C - Product Brief
Medium Power Differential Line Driver
Features
• Drives up to 360mA from a +15V
supply
• 16VP-P differential output drive
into 25and 20VP-P differential
output drive into 100
• -85dBc typical driver output
distortion at full output at 150kHz
• Low quiescent current of 3.5mA
per amplifier at ½-IS current mode
• Disable down to 1.5mA
Applications
• ADSL CSA line driving
• ADSL full rate CPE line driving
• G.SHDSL, HDSL2 line driver
• Video distribution amplifier
• Video twisted-pair line driver
Ordering Information
Part No
Package
EL1511CS
16-Pin SO (0.150”)
EL1511CS-T7 16-Pin SO (0.150”)
EL1511CS-T13 16-Pin SO (0.150”)
EL1511CL
16-Pin LPP
EL1511CL-T7
16-Pin LPP
EL1511CL-T13
16-Pin LPP
Tape &
Reel
-
7”
13”
-
7”
13”
Outline #
MDP0027
MDP0027
MDP0027
MDP0046
MDP0046
MDP0046
General Description
The EL1511C is a dual operational amplifier designed for customer
premise line driving in DMT ADSL solutions. This device features a
high drive capability of 360mA while consuming only 7.5mA of sup-
ply current per amplifier and operating from a single 5V to 15V
supply. This driver achieves a typical distortion of less than -85dBc, at
150kHz into a 25load. The EL1511C is available in the thermally-
enhanced 16-pin SO (0.150") and a 16-pin LPP (4x4mm) packages.
The EL1511C is specified for operation over the full -40°C to +85°C
temperature range. Electrical characteristics are given for typical 12V
supply operation.
The EL1511C has two control pins, C0 and C1, which allow the selec-
tion of full IS power, ¾-IS, ½-IS, and power-down modes.
The EL1511C is ideal for ADSL, SDSL, and HDSL2 line driving
applications for single power supply, high voltage swing, and low
power.
The EL1511C maintains excellent distortion and load driving capabil-
ities even in the lowest power settings.
Connection Diagram
NC 1
VOUTA 2
VIN-A 3
GND* 4
GND* 5
VIN+A 6
GND 7
VS- 8
++
--
Power
Control
Logic
16 VS+
15 VOUTB
14 VIN-B
13 GND*
12 GND*
11 VIN+B
10 C1
9 C0
EL1511CS
[16-Pin SO (0.150”)]
NC 1
INA- 2
INA+ 3
GND 4
Amp A
-
+
Amp B
-
+
Power Control
Logic
12 NC
11 INB-
10 INB+
9 C1
EL1511CL
(16-Pin LPP Top View)
* These GND pins are heat spreaders
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.





SeitenGesamt 2 Seiten
PDF Download[ EL1511C Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
EL1511Medium Power Differential Line DriverIntersil Corporation
Intersil Corporation
EL1511CMedium Power Differential Line DriverElantec
Elantec

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche