|
|
Teilenummer | EE2-3NUX |
|
Beschreibung | Compact and lightweight/ High breakdown voltage/ Surface mounting type | |
Hersteller | NEC | |
Logo | ||
Gesamt 12 Seiten DATA SHEET
MINIATURE SIGNAL RELAY
EE2 SERIES
Compact and lightweight, High breakdown voltage,
Surface mounting type
DESCRIPTION
The EE2 series surface-mounting type sustaining high-performance of NEC EC2 series.
FEATURES
™ Compact and light weight
™ 2 form c contact arrangement
™ Low power consumption
™ Reduced mounting space : 15 mm × 9.5 mm
™ High-breakdown voltage of coil to contacts : 1500 Vac, 2500 V
(rise time : 2 µs, fall time : 10 µs)
™ Low power consumption : 100 to 140 mW
™ Capable of High-power switching : 700 Vac, 4.2 A, 4 times in case of accident
™ UL recognized (E73266), CAS certified (LR46266)
APPLICATIONS
Electronic switching systems, PBX, terminal equipment, telephone system.
For Right Use of Miniature Relays
DO NOT EXCEED MAXIMUM RATINGS.
Do not use relays under exceeding conditions such as over ambient temperature, over voltage
and over current. Incorrect use could result in abnormal heating, damage to related parts or
cause burning.
READ CAUTIONS IN THE SELECTION GUIDE.
Read the cautions described in NEC's "Miniature Relays" (ER0046EJ∗) when you choose relays
for your application.
Document No. ER0017EJ4V0DS00 (4th edition)
Date Published June 1999 M
Printed in Japan
© 1994(1996)
TYPICAL PERFORMANCE DATA
SWITCHING CAPACITY
DC Load (resistive)
2 AC Load (resistive)
1
0.5
0.2
0.4 0.273 A
0.2
30 100 200
Switching Voltage (V)
250 V
220 V
OPERATE TIME
3 Operate Time
Bounce Time at Operate (ms)
2
1
0 100 200 300 400 500
Applied Power (mW)
RELEASE TIME WITHOUT DIODE
2
Release Time
1
Bounce Time at Release
0 100 200 300 400 500
Applied Power (mW)
RUNNING SPECIFICATIONS (Noload)
5
Operate Voltage
Release Voltage
4
Sample : EE2-5 n=10
Load : None
3
2
1
01
23
4
10
Number of Operations(x106operations)
EE2 SERIES
COIL TEMPERATURE RISE
50
40
30
20
10
0 100 200 300 400
Applied Power (mW)
RELEASE TIME WITH DIODE
Release Time
2
Bounce Time at Release
1
0
100 200 300 400
500
Applied Power (mW)
1000
500
300
200
100
50
30
20
10
0
Make contact
Break contact
Temperature : 85˚C
Drive : 5 Vdc, 10 Hz 5% duty
1
23
5
10
Number of Operations(x106operations)
6 DATA SHEET ER0017EJ4V0DS00
6 Page EE2 SERIES
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which
may appear in this document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellec-
tual property rights of third parties by or arising from use of a device described herein or any other
liability arising from use of such device. No license, either express, implied or otherwise, is granted
under any patents, copyrights or other intellectual property rights of NEC Corporation or others.
While NEC Corporation has been making continuous effort to enhance the reliability of its electronic
components, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or
injury to persons or property arising from a defect in an NEC electronic component, customers must
incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-
failure features.
NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based
on a customer designated "quality assurance program" for a specific application. The recommended
applications of a device depend on its quality grade, as indicated below. Customers must check the
quality grade of each device before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment, au-
dio and visual equipment, home electronic appliances, machine tools, personal electronic equip-
ment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically de-
signed for life support)
Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
Anti-radioactive design is not implemented in this product.
12 Page | ||
Seiten | Gesamt 12 Seiten | |
PDF Download | [ EE2-3NUX Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
EE2-3NU | Compact and lightweight/ High breakdown voltage/ Surface mounting type | NEC |
EE2-3NU-L | Compact and lightweight/ High breakdown voltage/ Surface mounting type | NEC |
EE2-3NU-R | Compact and lightweight/ High breakdown voltage/ Surface mounting type | NEC |
EE2-3NUH | Compact and lightweight/ High breakdown voltage/ Surface mounting type | NEC |
EE2-3NUH-L | Compact and lightweight/ High breakdown voltage/ Surface mounting type | NEC |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |