Datenblatt-pdf.com


W.FL-R-1 Schematic ( PDF Datasheet ) - Hirose Electric

Teilenummer W.FL-R-1
Beschreibung Ultra Small Surface Mount Coaxial Connectors - 1.4mm Mated Height
Hersteller Hirose Electric
Logo Hirose Electric Logo 




Gesamt 6 Seiten
W.FL-R-1 Datasheet, Funktion
NEW
Ultra Small Surface Mount Coaxial Connectors – 1.4mm Mated Height
W.FL Series – Further downsizing of FL series in response to the market needs.
Occupied Mounting Area
2.0
2.0
sFeatures
1. Mounting area of only 3.4mm2
q Mated Height Comparison(With U.FL series)
2. The board mounted receptacle weights only 5.6 mg
3. Accepts high frequency transmission of DC to 6GHz
4. Receptacle supplied on tape-and-reel for
4. placement on the board with automatic equipment
W.FL-LP-040
U.FL-LP(V)-040
U.FL-LP-040
U.FL-LP-066
5. Plugs are terminated with ultra-fine Teflon®
4. insulated coaxial cables
6. Un-mating with a simple tool
sApplications
Mobile phones, Wireless LAN, Bluetooth protocol
devices, PDA, GPS, electronic measuring instruments
and any application requiring high frequency
transmission over coaxial line, where space is limited.
W.FL Series
U.FL Series
Plug
2.85
Cable
Dia. 0.81
W.FL-R-SMT-1
Receptacle
* Teflon is a registered trademark of DuPont.
2004.4
1






W.FL-R-1 Datasheet, Funktion
sUsage Precautions
1. Plugs
(1) Mating/ un-mating
1) Mating.
1) Both parts must be aligned on the axis to mate correct. Press down firmly. A tactile “click” will confirm fully
mated condition.
2) Un-mating.
1) Fully insert the tool under the plug’s flanges as shown.
1) Apply even force upward until the plug is free.
W.FL-LP-N plug extraction tool
W.FL Cable
Assembly
Do not twist, apply excessive forces or sharp bends to the cable.
W.FL-R-SMT-1
(2) Cable handling
W.FL-LP-040
Cable Assembly
W.FL-R-SMT-1
Receptacle
2N max
(3) Precautions
Do NOT forcefully twist or deform wires.
2. Receptacles
(1) Recommended soldering
temperature profile
Peak temperature and time
ç 240ç 3 seconds
260
240
220
200
183ç
180
160 Preheating (130ç to 165ç)
140
120
100 Within 2 minutes
80
40 to 50 seconds
Time
(2) Recommended screen thickness
1) The temperature profile indicates the board surface temperature at the point of contacts with the connector
terminals.
2) The temperature may vary, depending on the board size, the solder paste type and thickness.
0.1 to 0.12 mm
® 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
6

6 Page







SeitenGesamt 6 Seiten
PDF Download[ W.FL-R-1 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
W.FL-R-1Ultra Small Surface Mount Coaxial Connectors - 1.4mm Mated HeightHirose Electric
Hirose Electric
W.FL-R-SMT-1Ultra Small Surface Mount Coaxial Connectors - 1.4mm Mated HeightHirose Electric
Hirose Electric
W.FL-R-SMT-110Ultra Small Surface Mount Coaxial Connectors - 1.4mm Mated HeightHirose Electric
Hirose Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche