Datenblatt-pdf.com


PB58 Schematic ( PDF Datasheet ) - ETC

Teilenummer PB58
Beschreibung POWER BOOSTER AMPLIFIERS
Hersteller ETC
Logo ETC Logo 




Gesamt 4 Seiten
PB58 Datasheet, Funktion
MICROTECHNOLOGY
POWER BOOSTER AMPLIFIERS
PB58 • PB58A
HTTP://WWW.APEXMICROTECH.COM (800) 546-APEX (800) 546-2739
FEATURES
• WIDE SUPPLY RANGE — ±15V to ±150V
• HIGH OUTPUT CURRENT —
1.5A Continuous (PB58)
2.0A Continuous (PB58A)
• VOLTAGE AND CURRENT GAIN
• HIGH SLEW — 50V/µs Minimum (PB58)
75V/µs Minimum (PB58A)
• PROGRAMMABLE OUTPUT CURRENT LIMIT
• HIGH POWER BANDWIDTH — 320 kHz Minimum
• LOW QUIESCENT CURRENT — 12mA Typical
• EVALUATION KIT — See EK50
APPLICATIONS
• HIGH VOLTAGE INSTRUMENTATION
• Electrostatic TRANSDUCERS & DEFLECTION
• Programmable Power Supplies Up to 280V p-p
DESCRIPTION
The PB58 is a high voltage, high current amplifier designed
to provide voltage and current gain for a small signal, general
purpose op amp. Including the power booster within the feed-
back loop of the driver amplifier results in a composite amplifier
with the accuracy of the driver and the extended output voltage
range and current capability of the booster. The PB58 can also
be used without a driver in some applications, requiring only an
external current limit resistor to function properly.
The output stage utilizes complementary MOSFETs, provid-
ing symmetrical output impedance and eliminating second
breakdown limitations imposed by Bipolar Transistors. Internal
feedback and gainset resistors are provided for a pin-strapable
gain of 3. Additional gain can be achieved with a single external
resistor. Compensation is not required for most driver/gain
configurations, but can be accomplished with a single external
capacitor. Enormous flexibility is provided through the choice of
driver amplifier, current limit, supply voltage, voltage gain, and
compensation.
This hybrid circuit utilizes a beryllia (BeO) substrate, thick film
resistors, ceramic capacitors and semiconductor chips to maxi-
mize reliability, minimize size and give top performance.
Ultrasonically bonded aluminum wires provide reliable inter-
connections at all operating temperatures. The 8-pin TO-3
package is electrically isolated and hermetically sealed using
one-shot resistance welding. The use of compressible isolation
washers voids the warranty.
TYPICAL APPLICATION
CF
Figure 1. Inverting
composite amplifier.
VIN R I
RF
+15V
+Vs
OP
AMP
IN
COM PB58
–15V
–Vs
R CL
OUT
CC
RG
RL
EQUIVALENT SCHEMATIC
Q2
Q1
IN
4
GAIN 6.2K
7
50K
COM
5
COMP
8
Q4
3.1K
Q6
Q11
Q9 Q10
3
+Vs
Q3
Q5
Q7
OUT
1
2
CL
Q8
–Vs
6
EXTERNAL CONNECTIONS
+Vs
3
CL
2
IN 4
COM
5
TOP VIEW
R CL
OUT
1
COMP
8
CC
–Vs 6
7
GAIN
RG
APEX MICROTECHNOLOGY CORPORATION • TELEPHONE (520) 690-8600 • FAX (520) 888-3329 • ORDERS (520) 690-8601 • EMAIL [email protected]





SeitenGesamt 4 Seiten
PDF Download[ PB58 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PB50POWER BOOSTER AMPLIFIERETC
ETC
PB5006Bridge RectifiersVishay
Vishay
PB5008Bridge RectifiersVishay
Vishay
PB5010Bridge RectifiersVishay
Vishay
PB521BXP-Channel Enhancement Mode MOSFETUNIKC
UNIKC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche