|
|
PDF RGL34D Data sheet ( Hoja de datos )
| Número de pieza | RGL34D | |
| Descripción | SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER | |
| Fabricantes | General Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de RGL34D (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
RGL34A THRU RGL34J
SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
Reverse Voltage - 50 to 600 Volts
Forward Current - 0.5 Ampere
DO-213AA
SOLDERABLE ENDS
1st BAND
2nd BAND
D2 D1=
0.066
0.060
(1.676)
(1.524)
0.022 (0.559)
0.016 (0.406)
0.145 (3.683)
0.131(3.327)
D2
=
D1
+
-
0
0.008
(0.20)
1st band denotes type and polarity
2cnd band denotes voltage type
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No.3,996,602 and brazed-lead assembly by Patent No.3,930,306
®
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ For surface mount applications
♦ High temperature metallurgically bonded construction
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed:
450°C/5 seconds at terminals. Complete device
submersible temperature of 260°C for 10 seconds in
solder bath
MECHANICAL DATA
Case: JEDEC DO-213AA molded plastic over glass body
Terminals: Plated terminals, solderable per MIL-STD-750,
Method 2026
Polarity: Two bands indicate cathode end - 1st band
denotes device type and 2nd band denotes repetitive peak
reverse voltage rating
Mounting Position: Any
Weight: 0.0014 ounce, 0.036 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°°C ambient temperature unless otherwise specified.
Fast switching device: 1st band is Red
SYMBOLS
RGL34A
RGL34B
RGL34D
RGL34G
Polarity color bands (2nd Band)
Gray
Red Orange Yellow
Maximum repetitive peak reverse voltage
VRRM 50 100 200 400
Maximum RMS voltage
VRMS
35
70 140 280
Maximum DC blocking voltage
VDC 50 100 200 400
Maximum average forward rectified current
at TT=55°C
I(AV)
0.5
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
10.0
Maximum instantaneous forward voltage at 0.5A
VF
1.3
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
IR
5.0
50.0
Maximum full load reverse current, full cycle
average TA=55°C
IR(AV)
30.0
Maximum reverse recovery time (NOTE 1)
trr
150
Typical junction capacitance (NOTE 2)
CJ
4.0
Maximum thermal resistance (NOTE 3)
(NOTE 4)
RΘJA
RΘJT
150.0
70.0
Operating junction and storage temperature range
TJ, TSTG
-65 to +175
NOTES:
(1) Reverse recovery test conditions IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient, 0.2 x 0.2” (5.0 x 5.0mm) copper pads to each terminal
(4) Thermal resistance from junction to terminal, 0.2 x 0.2” (5.0 x 5.0mm) copper pads to each terminal
RGL34J
Green
600
420
600
UNITS
Volts
Volts
Volts
Amp
Amps
Volts
µA
µA
250 ns
pF
°C/W
°C
4/98
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet RGL34D.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| RGL34 | TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER |  Dc Components |
| RGL34 | SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER | General Semiconductor |
| RGL34A | TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER | Dc Components |
| RGL34A | SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER | General Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |