|
|
Teilenummer | RF2352PCBA |
|
Beschreibung | 3V CDMA DRIVER AMPLIFIER | |
Hersteller | RF Micro Devices | |
Logo | ||
Gesamt 6 Seiten Preliminary
4
RF2352
3V CDMA DRIVER AMPLIFIER
Typical Applications
• TDMA/CDMA/FM Driver Amplifier
• Low Noise Transmit Driver Amplifier
• General Purpose Amplification
• Commercial and Consumer Systems
Product Description
The RF2352 is a low noise driver amplifier for 900MHz
CDMA/AMPS applications. The device is designed for
operation from 2.7V to 3.6V, and features selectable high
and low gain modes. In high gain mode, the device will
provide about 19dB of gain, and the linearity and current
drain are set with an external resistor, allowing the
designer to select the optimum performance for a given
application. In the low gain, or “bypass” mode, the gain is
controlled by an external attenuator network, and the
device draws essentially no current. The part is fabricated
using a high performance silicon BiCMOS process, and is
packaged in a 4mmx4mm, 16-pin, leadless chip carrier.
Optimum Technology Matching® Applied
Si BJT
üSi Bi-CMOS
GaAs HBT
SiGe HBT
GaAs MESFET
Si CMOS
1 16 15 14 13
RF IN 2
12 RF OUT
NC 3
11 VCC
VREF 4
10 ATT OUT2
56789
3.75
3.75
0.75
0.50
0.45
0.28
2
0.80
TYP
1
1
+ 1.60 4.00
INDEX AREA 3
12°
0.75
0.65
1.00
0.90
0.05
0.00
1.50 SQ
3.20
4.00
NOTES:
1 Shaded Pin is Lead 1.
2
Dimension applies to plated terminal and is measured between
0.10 mm and 0.25 mm from terminal tip.
The terminal #1 identifier and terminal numbering convention
3 shall conform to JESD 95-1 SPP-012. Details of terminal #1
identifier are optional, but must be located within the zone
indicated. The identifier may be either a mold or marked
feature.
4 Pins 1 and 9 are fused.
5 Package Warpage: 0.05 max.
Package Style: LCC, 16-Pin, 4x4
Features
• Low Noise and High Intercept Point
• Power Down Control
• Gain Control
• Single 2.7V to 3.6V Power Supply
• Extremely Small MLF16 Package
Ordering Information
RF2352
3V CDMA Driver Amplifier
RF2352 PCBA Fully Assembled Evaluation Board
Functional Block Diagram
RF Micro Devices, Inc.
7628 Thorndike Road
Greensboro, NC 27409, USA
Tel (336) 664 1233
Fax (336) 664 0454
http://www.rfmd.com
4
Rev A4 010720
4-177
RF2352
-50.0
-52.0
-54.0
ACPR1 versus ICC
VCC=3V, VPD=2.8V, Temperature=26°C, POUT=4dBm
824 MHz
874 MHz
925MHz
-56.0
-58.0
-60.0
-62.0
-64.0
4
-66.0
-68.0
-70.0
10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0
ICC (mA)
Gain versus VCC
25.0 ICC=15mA, VPD=2.8V, Temperature=25°C, POUT=4dBm
824 MHz
24.0 874 MHz
23.0 925 MHz
22.0
21.0
20.0
19.0
18.0
17.0
16.0
15.0
2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5
VCC (V)
Preliminary
-70.0
-72.0
-74.0
ACPR2 versus ICC
VCC=3V, VPD=2.8V, Temperature=26°C, POUT=4dBm
824 MHz
874 MHz
925 MHz
-76.0
-78.0
-80.0
-82.0
-84.0
-86.0
-88.0
-90.0
10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0
ICC (mA)
4-182
Rev A4 010720
6 Page | ||
Seiten | Gesamt 6 Seiten | |
PDF Download | [ RF2352PCBA Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
RF2352PCBA | 3V CDMA DRIVER AMPLIFIER | RF Micro Devices |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |