Datenblatt-pdf.com


P6SMBJ30C Schematic ( PDF Datasheet ) - Pan Jit International Inc.

Teilenummer P6SMBJ30C
Beschreibung SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 600 Watt Peak Power Pulse)
Hersteller Pan Jit International Inc.
Logo Pan Jit International Inc. Logo 




Gesamt 4 Seiten
P6SMBJ30C Datasheet, Funktion
Approve Sheet Part Number: P6SMBJ SERIES
3.DATA SHEET
P6SMBJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 5.0 to 220 Volts 600 Watt Peak Power Pulse
FEATURES
• For surface mounted applications in order to optimize board space.
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Excellent clamping capability
• Low inductance
• Fast response time: typically less than 1.0 ps from 0 volts to BV min
• Typical IR less than 1µA above 10V
• High temperature soldering : 250°C/10 seconds at terminals.
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
SMB / DO-214AA
Unit: inch ( mm )
.185 (4.70)
.160 (4.06)
.012 (.305)
.006 (.152)
MECHANICAL DATA
Case: JEDEC DO-214AA, Molded plastic over passivated junction
Terminals: Solder plated , solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes positive end ( cathode) except
Bidirectional.
Standard Packageing: 12mm tape per (EIA-481)
Weight: 0.003 ounces, 0.093 gram
.050 (1.27)
.030 (0.76)
.008(.203)
.002(.051)
.220 (5.59)
.200 (5.08)
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
RATING
Peak Power Dissipation at TA=25°C, TP=1ms(Note 1,2 ,Fig.1 )
Peak Forward Surge Current,8.3ms single half sine-wave
superimposed on rated load (Note 2,3)
Peak Pulse Current Current on 10/1000µs waveform(Note 1,Fig.3 )
Operating and Storage Temperature Range
SYMBOL
PPPM
IFSM
I
PPM
TJ, TSTG
VALUE
Minimum 600
100.0
See Table 1
-55 to +150
UNITS
Watts
Amps
Amps
°C
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25°Cper Fig. 2.
2.Mounted on 5.0mm2 ( .013mm thick) land areas.
3.Measured on 8.3ms , single half sine-wave or equivalent square wave , duty cycle= 4 pulses per minutes maximum.
PAGE . 3





SeitenGesamt 4 Seiten
PDF Download[ P6SMBJ30C Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
P6SMBJ30SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 600 Watt Peak Power Pulse)Pan Jit International Inc.
Pan Jit International Inc.
P6SMBJ30SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0-170VoltsSurge Components
Surge Components
P6SMBJ30TVS Diode, SMD (Transient Voltage Suppressor)TRSYS
TRSYS
P6SMBJ30Surface Mount unidirectional and bidirectional Transient Voltage Suppressor DiodesDiotec Semiconductor
Diotec Semiconductor
P6SMBJ30SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODESunmate
Sunmate

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche