P6SMBJ12CA Datasheet PDF - Pan Jit International Inc.
| Part Number | P6SMBJ12CA | |
| Description | SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 600 Watt Peak Power Pulse) | |
| Manufacturers | Pan Jit International Inc. | |
| Logo |  |
|
|
There is a preview and P6SMBJ12CA download ( pdf file ) link at the bottom of this page. Total 4 Pages | ||
Preview 1 page No Preview Available !
Approve Sheet Part Number: P6SMBJ SERIES
3.DATA SHEET
P6SMBJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 5.0 to 220 Volts 600 Watt Peak Power Pulse
FEATURES
• For surface mounted applications in order to optimize board space.
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Excellent clamping capability
• Low inductance
• Fast response time: typically less than 1.0 ps from 0 volts to BV min
• Typical IR less than 1µA above 10V
• High temperature soldering : 250°C/10 seconds at terminals.
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
SMB / DO-214AA
Unit: inch ( mm )
.185 (4.70)
.160 (4.06)
.012 (.305)
.006 (.152)
MECHANICAL DATA
Case: JEDEC DO-214AA, Molded plastic over passivated junction
Terminals: Solder plated , solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes positive end ( cathode) except
Bidirectional.
Standard Packageing: 12mm tape per (EIA-481)
Weight: 0.003 ounces, 0.093 gram
.050 (1.27)
.030 (0.76)
.008(.203)
.002(.051)
.220 (5.59)
.200 (5.08)
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
RATING
Peak Power Dissipation at TA=25°C, TP=1ms(Note 1,2 ,Fig.1 )
Peak Forward Surge Current,8.3ms single half sine-wave
superimposed on rated load (Note 2,3)
Peak Pulse Current Current on 10/1000µs waveform(Note 1,Fig.3 )
Operating and Storage Temperature Range
SYMBOL
PPPM
IFSM
I
PPM
TJ, TSTG
VALUE
Minimum 600
100.0
See Table 1
-55 to +150
UNITS
Watts
Amps
Amps
°C
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25°Cper Fig. 2.
2.Mounted on 5.0mm2 ( .013mm thick) land areas.
3.Measured on 8.3ms , single half sine-wave or equivalent square wave , duty cycle= 4 pulses per minutes maximum.
PAGE . 3
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for P6SMBJ12CA electronic component. |
| Information | Total 4 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ P6SMBJ12CA.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| P6SMBJ12C | The function is SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 600 Watt Peak Power Pulse). Pan Jit International Inc. | |
| P6SMBJ12C | The function is SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0-170Volts. Surge Components |  |
| P6SMBJ12C | The function is TVS Diode, SMD (Transient Voltage Suppressor). TRSYS |  |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
P6SM
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||