Datenblatt-pdf.com


P6KE9.1 Schematic ( PDF Datasheet ) - Diotec Semiconductor

Teilenummer P6KE9.1
Beschreibung Unidirectional and bidirectional Transient Voltage Suppressor Diodes
Hersteller Diotec Semiconductor
Logo Diotec Semiconductor Logo 




Gesamt 4 Seiten
P6KE9.1 Datasheet, Funktion
P6 KE 6.8 ... P6 KE 440CA, P6 KE 520C
Unidirectional and bidirectional
Transient Voltage Suppressor Diodes
Unidirektionale und bidirektionale
Spannungs-Begrenzer-Dioden
Dimensions / Maße in mm
Peak pulse power dissipation
Impuls-Verlustleistung
600 W
Nominal breakdown voltage
Nominale Abbruch-Spannung
6.8...520 V
Plastic case – Kunststoffgehäuse
DO-15 (DO-204AC)
Weight approx. – Gewicht ca.
0.4 g
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped in ammo pack
Standard Lieferform gegurtet in Ammo-Pack
see page 16
siehe Seite 16
For bidirectional types (suffix “C” or “CA”), electrical characteristics apply in both directions.
Für bidirektionale Dioden (Suffix “C” oder “CA”) gelten die el. Werte in beiden Richtungen.
Maximum ratings and Characteristics
Kenn- und Grenzwerte
Peak pulse power dissipation (10/1000 :s waveform)
Impuls-Verlustleistung (Strom-Impuls 10/1000 :s)
Steady state power dissipation
Verlustleistung im Dauerbetrieb
TA = 25/C
TA = 25/C
PPPM
600 W 1)
PM(AV)
5 W 2)
Peak forward surge current, 60 Hz half sine-wave
Stoßstrom für eine 60 Hz Sinus-Halbwelle
TA = 25/C
IFSM
100 A 3)
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Max. instantaneous forward voltage
IF = 50 A
Augenblickswert der Durchlaßspannung
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
VBR # 200 V
VBR > 200 V
Tj – 50…+175/C
TS – 50…+175/C
VF < 3.5 V 3)
VF < 5.0 V 3)
RthA < 30 K/W 2)
Thermal resistance junction to lead
Wärmewiderstand Sperrschicht – Anschlußdraht
RthL < 15 K/W
1) Non-repetitive current pulse see curve IPPM = f (tr)
Höchstzulässiger Spitzenwert eines einmaligen Strom-Impulses, siehe Kurve IPPM = f (tr)
2) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case
Gültig, wenn die Anschlußdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden
3) Unidirectional diodes only – Nur für unidirektionale Dioden
25.03.2003
1





SeitenGesamt 4 Seiten
PDF Download[ P6KE9.1 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
P6KE9.0CDiode TVS Single Uni-Dir 7.78V 600W 2-Pin DO-15New Jersey Semiconductor
New Jersey Semiconductor
P6KE9.1600W TRANSIENT VOLTAGE SUPPRESSORSWon-Top Electronics
Won-Top Electronics
P6KE9.1TRANSZORB TRANSIENT VOLTAGE SUPPRESSORGeneral Semiconductor
General Semiconductor
P6KE9.1TRANSIENT ABSORPTION ZENERMicrosemi Corporation
Microsemi Corporation
P6KE9.1TRANSIENT VOLTAGE SUPPRESSORS DIODEJinan Gude Electronic Device
Jinan Gude Electronic Device

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche