Datenblatt-pdf.com


P4SMAJ17 Schematic ( PDF Datasheet ) - Pan Jit International Inc.

Teilenummer P4SMAJ17
Beschreibung SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 400 Watt Peak Power Pulse)
Hersteller Pan Jit International Inc.
Logo Pan Jit International Inc. Logo 




Gesamt 4 Seiten
P4SMAJ17 Datasheet, Funktion
Approve Sheet Part Number: P4SMAJ SERIES
3.DATA SHEET
P4SMAJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 5.0 to 220 Volts 400 Watt Peak Power Pulse
SMA / DO-214AC
Unit: inch ( mm )
FEATURES
• For surface mounted applications in order to optimize board space.
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Excellent clamping capability
• Low inductance
• Fast response time: typically less than 1.0 ps from 0 volts to BV min
• Typical IR less than 1µA above 10V
• High temperature soldering : 250°C/10 seconds at terminals.
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
.181 (4.60)
.157 (4.00)
.012 (.305)
.006 (.152)
MECHANICAL DATA
Case: JEDEC DO-214AC low profile molded plastic
Terminals: Solder leads, solderable per MIL-STD-750, Method 2026
Polarity: Indicated by cathode band except Bi-directional types.
Standard Packageing: 12mm tape per(EIA-481)
Weight: 0.002 ounces, 0.064 gram
.060 (1.52)
.030 (0.76)
.008(.203)
.002(.051)
.208 (5.28)
.188 (4.80)
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
RATING
Peak Power Dissipation at TA=25°C, TP=1ms(Note 1,2,5)Fig.1
Peak Forward Surge Current, per Figure 5(Note 3)
Peak Pulse Current Current on 10/1000µs waveform(Note 1,2,5)Fig.2
Steady State Power Dissipation(Note 4)
Operating and Storage Temperature Range
SYMBOL
PPPM
IFSM
IPPM
PM(AV)
TJ, TSTG
VALUE
Minimum 400
40.0
See Table 1
1.0
-55 to +150
UNITS
Watts
Amps
Amps
Watts
°C
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25°Cper Fig. 2.
2.Mounted on 5.0mm2 Copper pads to each terminal.
3.8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
4.lead temperature at 75°C=TL.
5.Peak pluse power waveformis 10/1000µS.
PAGE . 3





SeitenGesamt 4 Seiten
PDF Download[ P4SMAJ17 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
P4SMAJ10400 Watt Transient Voltage Suppressors 5.0 to 170 VoltsMicro Commercial Components
Micro Commercial Components
P4SMAJ10SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 400 Watt Peak Power Pulse)Pan Jit International Inc.
Pan Jit International Inc.
P4SMAJ10SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0-170VoltsSurge Components
Surge Components
P4SMAJ10TVS Diode, SMD (Transient Voltage Suppressor)TRSYS
TRSYS
P4SMAJ10Surface Mount unidirectional and bidirectional Transient Voltage Suppressor DiodesDiotec Semiconductor
Diotec Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche