|
|
Número de pieza | P4KE9.1 | |
Descripción | Unidirectional and bidirectional Transient Voltage Suppressor Diodes | |
Fabricantes | Diotec Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de P4KE9.1 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
No Preview Available ! P4 KE 6.8 ... P4 KE 440CA
Unidirectional and bidirectional
Transient Voltage Suppressor Diodes
Unidirektionale und bidirektionale
Spannungs-Begrenzer-Dioden
Dimensions / Maße in mm
Peak pulse power dissipation
Impuls-Verlustleistung
400 W
Nominal breakdown voltage
Nominale Abbruch-Spannung
6.8...440 V
Plastic case – Kunststoffgehäuse
DO-15 (DO-204AC)
Weight approx. – Gewicht ca.
0.4 g
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped in ammo pack
Standard Lieferform gegurtet in Ammo-Pack
see page 16
siehe Seite 16
For bidirectional types (suffix “C” or “CA”), electrical characteristics apply in both directions.
Für bidirektionale Dioden (Suffix “C” oder “CA”) gelten die el. Werte in beiden Richtungen.
Maximum ratings and Characteristics
Kenn- und Grenzwerte
Peak pulse power dissipation (10/1000 :s waveform)
Impuls-Verlustleistung (Strom-Impuls 10/1000 :s)
Steady state power dissipation
Verlustleistung im Dauerbetrieb
TA = 25/C
TA = 25/C
PPPM
PM(AV)
400 W 1)
1 W 2)
Peak forward surge current, 60 Hz half sine-wave
Stoßstrom für eine 60 Hz Sinus-Halbwelle
TA = 25/C
IFSM
40 A 3)
Max. instantaneous forward voltage
IF = 25 A
Augenblickswert der Durchlaßspannung
VBR # 200 V
VBR > 200 V
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
VF < 3.0 V 3)
VF < 6.5 V 3)
Tj – 50…+175/C
TS – 50…+175/C
RthA < 45 K/W 2)
Thermal resistance junction to lead
Wärmewiderstand Sperrschicht – Anschlußdraht
RthL < 15 K/W
1) Non-repetitive current pulse see curve IPPM = f (tr)
Höchstzulässiger Spitzenwert eines einmaligen Strom-Impulses, siehe Kurve IPPM = f (tr)
2) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case
Gültig, wenn die Anschlußdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden
3) Unidirectional diodes only – Nur für unidirektionale Dioden
07.01.2003
1
1 page |
Páginas | Total 4 Páginas | |
PDF Descargar | [ Datasheet P4KE9.1.PDF ] |
Número de pieza | Descripción | Fabricantes |
P4KE9.1 | TRANSIENT VOLTAGE SUPPRESSORS DIODE | Jinan Gude Electronic Device |
P4KE9.1 | 400W TRANSIENT BOLTAGE SUPPRESSORS | Won-Top Electronics |
P4KE9.1 | TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR | General Semiconductor |
P4KE9.1 | 400 Watt Transient Voltage Suppressors 6.8 to 400 Volts | Micro Commercial Components |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |