Datenblatt-pdf.com


ELJ-FAR33MF2 Schematic ( PDF Datasheet ) - TriQuint Semiconductor

Teilenummer ELJ-FAR33MF2
Beschreibung 9.9-11.2Gb/s Optical Modulator Driver
Hersteller TriQuint Semiconductor
Logo TriQuint Semiconductor Logo 




Gesamt 13 Seiten
ELJ-FAR33MF2 Datasheet, Funktion
Advance Product Datasheet
June 10, 2003
9.9-11.2Gb/s Optical Modulator Driver
TGA4953-EPU
OC-192 Metro and Long Haul Applications
Surface Mount Package
Key Features and Performance
• Metro MSA Compatible
• Wide Drive Range (3V to 10V)
• Single-ended Input / Output
• Low Power Dissipation (1W at Vo=6V)
• Very Low Rail Ripple
• 25 ps Edge Rates (20/80)
• Small Form Factor
- 11.4 x 8.9 x 2 mm
- 0.450 x 0.350 x 0.080 inches
• Evaluation Board Available.
Description
The TriQuint TGA4953-EPU is part of a series of surface
mount modulator drivers suitable for a variety of driver
applications and is compatible with Metro MSA standards.
The 4953 consists of two high performance wideband
amplifiers combined with off chip circuitry assembled in a
surface mount package. A single 4953 placed between
the MUX and Optical Modulator provides OEMs with a
board level modulator driver surface mount solution.
The 4953 provides Metro and Long Haul designers with
system critical features such as: low power dissipation
(1.1 W at Vo=6 V), very low rail ripple, high voltage drive
capability at 5V bias (6 V amplitude adjustable to 3 V), low
output jitter (10 ps typical), and low input drive sensitivity
(250 mV at Vo=6 V).
Primary Applications
• Mach-Zehnder Modulator Driver for
Metro and Long Haul.
Measured Performance
TGA4953 Evaluation Board (Metro MSA Conditions)
10.7 Gb/s, Vplus=5 V, Id=210 mA, (Pdc=1.1 Watt)
Vout=6 Vpp, CPC=50%, Vin = 500 mVpp
Scale: 2 V/div, 15 ps/div
The 4953 requires external DC blocks, a low frequency
choke, and control circuitry.
The TGA4953-EPU is available on an evaluation board.
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process
specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas : (972)994 8465 Fax (972)994 8504 Web: www.triquint.com
1






ELJ-FAR33MF2 Datasheet, Funktion
Advance Product Datasheet
TGA4953EPU
Demonstration Board
DC Block
Mother Board
DC Block
RFin
RFout
TGA4953 Driver Package
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process
specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas : (972)994 8465 Fax (972)994 8504 Web: www.triquint.com
6

6 Page









ELJ-FAR33MF2 pdf, datenblatt
Advance Product Datasheet
TGA4953EPU
Bias Procedure
Vdd=5V, Vo=6Vamp, CPC=50%
Bias ON
Bias OFF
1. Disable the output of the PPG
1. Disable the output of the PPG
2. Set Vd=0V Vctrl1=0V Vctrl2=0 Vg1=0V
2. Set Vctrl2=0V
and Vg2=0V
3. Set Vd=0V
3. Set Vg1=-1.5V Vg2=-1.5V Vctrl1=-0.2V
4. Set Vctrl1=0V
4. Increase Vd to 5V observing Id.
5. Set Vg2=0V
- Assure Id=0mA
6. Set Vg1=0V
5. Set Vctrl2=+0.2V
- Id should still be 0mA
6. Make Vg1 more positive until Idd=65mA.
- This is Id1 (current into the first stage)
- Typical value for Vg1 is -0.65V
7. Make Vg2 more positive until Idd=220mA.
- This sets Id2T to 155mA.
- Typical value for Vg2 is -0.55V
8. Enable the output of the PPG.
- Set Vin=500mV
9. Output Swing Adjust: Adjust Vctrl2 slightly positive to increase output swing or adjust
Vctrl slightly negative to decrease the output swing.
- Typical value for Vctrl2 is +0.22V for
Vo=6V.
10. Crossover Adjust: Adjust Vg2 slightly positive to push the crossover down or adjust
Vg2 slightly negative to push the crossover up.
- Typical value for Vg2 is -0.57V to center
crossover with Vo=6V.
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process
specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas : (972)994 8465 Fax (972)994 8504 Web: www.triquint.com
12

12 Page





SeitenGesamt 13 Seiten
PDF Download[ ELJ-FAR33MF2 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ELJ-FAR33MF29.9-11.2Gb/s Optical Modulator DriverTriQuint Semiconductor
TriQuint Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche