Datenblatt-pdf.com


EL6203CW Schematic ( PDF Datasheet ) - Elantec Semiconductor

Teilenummer EL6203CW
Beschreibung Laser Driver Oscillator
Hersteller Elantec Semiconductor
Logo Elantec Semiconductor Logo 




Gesamt 2 Seiten
EL6203CW Datasheet, Funktion
EL6203C - Product Brief
Laser Driver Oscillator
Features
• Low power dissipation
• User-selectable frequency from
60MHz to 600MHz controlled
with a single resistor
• User-specified amplitude from
10mA pk-pk to 100mA pk
controlled with a single resistor
• Auto turn-off threshold
• Soft edges for reduced EMI
• Small 5-pin SOT23 package
Applications
• DVD players
• DVD-ROM drives
• CD-RW drives
• MO drives
• General purpose laser noise
reduction
Ordering Information
Part No
EL6203CW
Package
5-Pin SOT23
Tape & Reel
Outline #
MDP0038
General Description
The EL6203C is a push-pull oscillator used to reduce laser noise. It
uses the standard interface to existing ROM controllers. The fre-
quency and amplitude are each set with a separate resistor connected
to ground. The tiny package and harmonic reduction allow the part to
be placed close to a laser with low RF emissions. An auto turn-off fea-
ture allows it to easily be used on combo CD-RW plus DVD-ROM
pick-ups.
One external resistor sets the oscillator frequency. Another external
resistor sets the oscillator amplitude. If the APC current is reduced
such that the average laser voltage drops to less than 1.1V, the output
and oscillator are disabled, reducing power consumption to a
minimum.
The current drawn by the oscillator consists of a small bias current,
plus the peak output amplitude in the positive cycle. In the negative
cycle the oscillator subtracts peak output amplitude from the laser
APC current.
This part is pin-compatible to the EL6201C. It is superior to the
EL6201C in several ways: It has up to 100mA output capability, it is
more power-efficient, it has less harmonic content, and it has an auto
shut-off feature activated at 1.1V.
The part is available in the space-saving 5-pin SOT23 package. It is
specified for operation from -0°C to 7C.
Connection Diagram
1 VDD
RFREQ 5
2 GND
3 IOUT
RAMP 4
5-Pin SOT23
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.





SeitenGesamt 2 Seiten
PDF Download[ EL6203CW Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
EL6203CLaser Driver OscillatorElantec Semiconductor
Elantec Semiconductor
EL6203CWLaser Driver OscillatorElantec Semiconductor
Elantec Semiconductor
EL6203CW-T7Laser Driver OscillatorIntersil Corporation
Intersil Corporation
EL6203CW-T7ALaser Driver OscillatorIntersil Corporation
Intersil Corporation
EL6203CWZ-T7Laser Driver OscillatorIntersil Corporation
Intersil Corporation

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche