Datenblatt-pdf.com


DM74ALS373 Schematic ( PDF Datasheet ) - Fairchild Semiconductor

Teilenummer DM74ALS373
Beschreibung Octal D-Type 3-STATE Transparent Latch
Hersteller Fairchild Semiconductor
Logo Fairchild Semiconductor Logo 




Gesamt 7 Seiten
DM74ALS373 Datasheet, Funktion
April 1984
Revised February 2000
DM74ALS373
Octal D-Type 3-STATE Transparent Latch
General Description
These 8-bit registers feature totem-pole 3-STATE outputs
designed specifically for driving highly-capacitive or rela-
tively low-impedance loads. The high-impedance state and
increased high-logic-level drive provide these registers with
the capability of being connected directly to and driving the
bus lines in a bus-organized system without need for inter-
face or pull-up components. They are particularly attractive
for implementing buffer registers, I/O ports, bidirectional
bus drivers, and working registers.
The eight latches of the DM74ALS373 are transparent D-
type latches. While the enable (G) is HIGH the Q outputs
will follow the data (D) inputs. When the enable is taken
LOW the output will be latched at the level of the data that
was set up.
A buffered output control input can be used to place the
eight outputs in either a normal logic state (HIGH or LOW
logic levels) or a high-impedance state. In the high-imped-
ance state the outputs neither load nor drive the bus lines
significantly.
The output control does not affect the internal operation of
the latches. That is, the old data can be retained or new
data can be entered even while the outputs are OFF.
Features
s Switching specifications at 50 pF
s Switching specifications guaranteed over full tempera-
ture and VCC range
s Advanced oxide-isolated, ion-implanted Schottky TTL
process
s Functionally and pin for pin compatible with LS TTL
counterpart
s Improved AC performance over DM74LS373 at approxi-
mately half the power
s 3-STATE buffer-type outputs drive bus lines directly
Ordering Code:
Order Number Package Number
Package Description
DM74ALS373WM
M20B
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
DM74ALS373SJ
M20D
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
DM74ALS373N
N20A
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
© 2000 Fairchild Semiconductor Corporation DS006220
www.fairchildsemi.com






DM74ALS373 Datasheet, Funktion
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M20D
www.fairchildsemi.com
6

6 Page







SeitenGesamt 7 Seiten
PDF Download[ DM74ALS373 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
DM74ALS373Octal D-Type 3-STATE Transparent LatchFairchild Semiconductor
Fairchild Semiconductor
DM74ALS374Octal 3-STATE D-Type Edge-Triggered Flip-FlopFairchild Semiconductor
Fairchild Semiconductor
DM74ALS37AQuadruple 2-Input NAND BufferFairchild Semiconductor
Fairchild Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche