Datenblatt-pdf.com


DM74123N Schematic ( PDF Datasheet ) - Fairchild Semiconductor

Teilenummer DM74123N
Beschreibung Dual Retriggerable One-Shot with Clear and Complementary Outputs
Hersteller Fairchild Semiconductor
Logo Fairchild Semiconductor Logo 




Gesamt 5 Seiten
DM74123N Datasheet, Funktion
August 1986
Revised March 2000
DM74123
Dual Retriggerable One-Shot with
Clear and Complementary Outputs
General Description
The DM74123 is a dual retriggerable monostable multi-
vibrator capable of generating output pulses from a few
nano-seconds to extremely long duration up to 100% duty
cycle. Each device has three inputs permitting the choice of
either leading-edge or trailing edge triggering. Pin (A) is an
active-LOW transition trigger input and pin (B) is an active-
HIGH transition trigger input. A LOW at the clear (CLR)
input terminates the output pulse: which also inhibits trig-
gering. An internal connection from CLR to the input gate
makes it possible to trigger the circuit by a positive-going
signal on CLR as shown in the Truth Table.
To obtain the best and trouble free operation from this
device please read the Operating Rules as well as the
One–Shot Application Notes carefully and observe recom-
mendations.
Features
s DC triggered from active-HIGH transition or active-LOW
transition inputs
s Retriggerable to 100% duty cycle
s Direct reset terminates output pulse
s Compensated for VCC and temperature variations
s DTL, TTL compatible
s Input clamp diodes
Ordering Code:
Order Number Package Number
Package Description
DM74123N
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Connection Diagram
Triggering Truth Table
Inputs
AB
XX
L
H
H
L
LH
H = HIGH Voltage Level
L = LOW Voltage Level
X = Immaterial
CLR
L
X
H
X
H
Response
No Trigger
No Trigger
Trigger
No Trigger
Trigger
Trigger
Functional Description
The basic output pulse width is determined by selection of
an external resistor (RX) and capacitor (CX). Once trig-
gered, the basic pulse width may be extended by retrigger-
ing the gated active-LOW transition or active-HIGH
transition inputs or be reduced by use of the active-LOW
transition clear input. Retriggering to 100% duty cycle is
possible by application of an input pulse train whose cycle
time is shorter than the output cycle time such that a con-
tinuous “HIGH” logic state is maintained at the “Q” output.
© 2000 Fairchild Semiconductor Corporation DS006539
www.fairchildsemi.com





SeitenGesamt 5 Seiten
PDF Download[ DM74123N Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
DM74123Dual Retriggerable One-Shot with Clear and Complementary OutputsFairchild Semiconductor
Fairchild Semiconductor
DM74123DM54123/DM74123 Dual Retrigger 1-Shot w/Clear Complementary Outputs (Rev. A)Texas Instruments
Texas Instruments
DM74123NDual Retriggerable One-Shot with Clear and Complementary OutputsFairchild Semiconductor
Fairchild Semiconductor
DM74123NDual Retriggerable One-Shot with Clear and Complementary OutputsNational Semiconductor
National Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche