Datenblatt-pdf.com


ECG050B-PCB Schematic ( PDF Datasheet ) - ETC

Teilenummer ECG050B-PCB
Beschreibung InGaP HBT Gain Block
Hersteller ETC
Logo ETC Logo 




Gesamt 7 Seiten
ECG050B-PCB Datasheet, Funktion
ECG050
InGaP HBT Gain Block
The Communications Edge TM
Product Information
Product Features
x DC – 4 GHz
x +19 dBm P1dB at 1 GHz
x +34 dBm OIP3 at 1 GHz
x 19 dB Gain at 1 GHz
x 5.5 dB Noise Figure at 2 GHz
x Available in SOT-86, SOT-
89 and lead-free / green SOT-
89 Package Styles
x Internally matched to 50 :
Applications
x Mobile Infrastructure
x CATV / DBS
x W-LAN / ISM
x RFID
x Defense / Homeland Security
x Fixed Wireless
Product Description
The ECG050 is a general-purpose buffer amplifier that
offers high dynamic range in a low-cost surface-mount
package. At 1000 MHz, the ECG050 typically provides 19
dB of gain, +34 dBm Output IP3, and +19 dBm P1dB.
The ECG050 consists of Darlington pair amplifiers using
the high reliability InGaP/GaAs HBT process technology
and only requires DC-blocking capacitors, a bias resistor,
and an inductive RF choke for operation. The device is
ideal for wireless applications and is available in low-cost,
surface-mountable plastic SOT-86 and SOT-89 packages.
The ECG050 is also available in a lead-free/green/RoHS-
compliant SOT-89 package. All devices are 100% RF and
DC tested.
The broadband MMIC amplifier can be directly applied to
various current and next generation wireless technologies
such as GPRS, GSM, CDMA, and W-CDMA. In addition,
the ECG050 will work for other various applications within
the DC to 4 GHz frequency range such as CATV and fixed
wireless.
Functional Diagram
GND
4
123
RF IN GND RF OUT
ECG050B / ECG050B-G
GND
4
RF In 1
3 RF Out
2
GND
ECG050C
Specifications (1)
Parameter
Operational Bandwidth
Test Frequency
Gain
Output P1dB
Output IP3 (2)
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 (2)
Noise Figure
Device Voltage
Device Current
Units
MHz
MHz
dB
dBm
dBm
MHz
dB
dB
dB
dBm
dBm
dB
V
mA
Min
DC
4.2
Typ
1000
19
+19
+34
2000
17
19
15
+18.5
+31
5.4
5.0
70
Max
4000
5.2
1. Test conditions unless otherwise noted: 25º C, Supply Voltage = +6 V, Rbias = 14 ¡ , 50 ¡ System.
2. 3OIP measured with two tones at an output power of +4 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Typical Performance (3)
Parameter
Frequency
S21
S11
S22
Output P1dB
Output IP3
Noise Figure
Units
Typical
MHz
500 900 1900 2140
dB
20 19.2 17
16
dB -17 -18 -19 -20
dB -15 -15 -15 -15
dBm
+18 +19 +18.5 +18.2
dBm +33 +34 +31 +30.5
dB 3.5 4 5.4 3.8
3. Test conditions: T = 25º C, Supply Voltage = +6 V, Device Voltage = +5.0V, Rbias = 14 ¡ , 50 ¡ System.
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
RF Input Power (continuous)
Device Current
Junction Temperature
Rating
-40 to +85 qC
-65 to +150 qC
+12 dBm
150 mA
+250 qC
Ordering Information
Part No.
ECG050B
ECG050B-G
ECG050C
ECG050B-PCB
ECG050C-PCB
Description
InGaP HBT Gain Block
(leaded SOT-89 Pkg)
InGaP HBT Gain Block
(lead-free/green/RoHS-compliant SOT-89 Pkg)
InGaP HBT Gain Block (SOT-86 Pkg)
700 –2400 MHz Fully Assembled Eval. Board
700 –2400 MHz Fully Assembled Eval. Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc   Phone 1-800-WJ1-4401   FAX: 408-577-6621   e-mail: [email protected]   Web site: www.wj.com
December 2004






ECG050B-PCB Datasheet, Funktion
ECG050
InGaP HBT Gain Block
The Communications Edge TM
Product Information
ECG050C (SOT-86 Package) Mechanical Information
Outline Drawing
Product Marking
The component will be marked with a two-
digit numeric lot code followed by a “ V”
designator on the top surface of the
package.
Tape and reel specifications for this part are
located on the website in the “ Application
Notes” section.
MSL / ESD Rating
Land Pattern
ESD Rating: Class 1A
Value:
Passes between 250 and 500V
Test: Human Body Model (HBM)
Standard: JEDEC Standard JESD22-A114
MSL Rating: Level 1 at +235¢ C convection reflow
Standard: JEDEC Standard J-STD-020
Mounting Config. Notes
1. Ground / thermal vias are critical for the proper
performance of this device. Vias should use
a .35mm (#80 / .0135” ) diameter drill and have a
final plated thru diameter of .25 mm (.010” ).
2. Add as much copper as possible to inner and outer
layers near the part to ensure optimal thermal
performance.
3. Mounting screws can be added near the part to fasten
the board to a heatsink. Ensure that the ground /
thermal via region contacts the heatsink.
4. Do not put solder mask on the backside of the PC
board in the region where the board contacts the
heatsink.
5. RF trace width depends upon the PC board material
and construction.
6. Use 1 oz. Copper minimum.
7. All dimensions are in millimeters (inches). Angles
are in degrees.
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: [email protected] Web site: www.wj.com
£
££
£
December 2004

6 Page







SeitenGesamt 7 Seiten
PDF Download[ ECG050B-PCB Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ECG050B-PCBInGaP HBT Gain BlockETC
ETC
ECG050B-PCBInGaP HBT Gain BlockETC
ETC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche