|
|
PDF DF1E-2S-2.5C Data sheet ( Hoja de datos )
| Número de pieza | DF1E-2S-2.5C | |
| Descripción | 2.5mm Pitch Connector for Full Lock and Discrete Wire Connection | |
| Fabricantes | Hirose Electric | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DF1E-2S-2.5C (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
DF1E Series
Full lock function
added
Inner-lock system
full lock mechanism
Mis-insertion
prevention
sFeatures
1. Full Lock Function Added
The inner lock system adopts a full lock mechanism.
This mechanism prevents disengagement to occur due to
an unexpected external shock.
2. Increase in Crimping Contact Fixation Force and
Semi-insertion Prevention
The double lock is activated for the use method to give a
stress to the cable, to increase crimping contact fixation
force, and to prevent the semi-insertion of the crimping
contact.
3. Mold Lance Adopted
Since the contact lance may be deformed involving in the
contact after the crimping process, the mold lance has been
adopted.
4. Mis-insertion Prevention
Equipped with the mechanism to completely prevent reverse
insertion and insertion between dissimilar contacts.
5. Means to Prevent Solder Crack
The glass enforcement resin is adopted for the pin header to
prevent a solder crack to occur due to heat compression.
6. Correspond to Potting
Corresponding to potting, the pin header is provided for
product variations.
Corresponding to potting up to 8mm and mounting height
19.8mm (no retainer), the low profile is achieved.
7. Production Facility Cost Reduction
The female crimping contact uses the DF1B series crimping
contact, which has been conventionally marketed.
Investment for new facilities isn't needed. However, if the
retainer is installed in the cable with AWG#22 or more wire,
use the DF1E crimping contact. The female crimping
contact for in-line is used together with the DF1B applicator.
Therefore, no investment is needed for new facilities.
B116
Double lock
engaged
Double lock
engaged
8. Correspond to Automatic Insertion Machine
The radial tape packaging is provided for 2 to
8 contacts on the straight pin header side, in
order to correspond to mass production.
9. Various Applications
With the same series, various applications can
be used for the board solder dip type and in-
line.
sApplications
Electronic equipment, office machines,
industrial equipment, and consumer
equipment, and so on
1 page  
sRight Angle Pin Header
5.4 Mold Cavity
Contact No. mark No. mark
10 A
M 0.64
P = 2.5
A
B
Note 2
Contact No.1 indicated
Part Number
DF1E –02P–2.5DS(**)
DF1E –03P–2.5DS(**)
DF1E –04P–2.5DS(**)
DF1E –05P–2.5DS(**)
DF1E –06P–2.5DS(**)
DF1E –07P–2.5DS(**)
DF1E –08P–2.5DS(**)
DF1E –09P–2.5DS(**)
DF1E –10P–2.5DS(**)
DF1E –11P–2.5DS(**)
DF1E –12P–2.5DS(**)
DF1E –13P–2.5DS(**)
DF1E –14P–2.5DS(**)
DF1E –15P–2.5DS(**)
CL No.
541 – 0985– 0 –**
541 – 0986– 3 –**
541 – 0987– 6 –**
541 – 0988– 9 –**
541 – 0989– 1 –**
541 – 0990– 0 –**
541 – 0991– 3 –**
541 – 0992– 6 –**
541 – 0993– 9 –**
541 – 0994– 1 –**
541 – 0995– 4 –**
541 – 0996– 7 –**
541 – 0997– 0 –**
541 – 0998– 2 –**
Number of Contacts
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
B
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
37.5
40.0
The symbol ** included in
HRS No. and the product spec
No. indicates the Specific No.
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 4
contact connector is contained in the center at one point.
Note 3. : Styles of 2 to 4 contact connectors partially differ from those in above figures.
BPCB mounting pattern (Board Thickness t = 1.6 ± 0.1)
A±0.1
P = 2.5±0.05
B120
*
–
Ø1.1 +0.1
0
5 Page 
sRetainer
A
1.9
B
P = 2.5
1.7
0.7
Note2
Contact No. mark
A1 0
Mold Cavity
No. mark
Note2
Part Number
DF1E –02RS/P–2.5(**)
DF1E –03RS/P–2.5(**)
CL No.
541 – 0971 – 6
541 – 0972 – 9
Number of Contacts
2
3
A
08.0
10.5
B
02.5
05.0
The symbol ** included in
HRS No. and the product spec
No. indicates the Specific No.
DF1E –04RS/P–2.5(**)
541 – 0973 – 1
4
13.0
07.5
DF1E –05RS/P–2.5(**)
541 – 0974 – 4
5
15.5
10.0
DF1E –06RS/P–2.5(**)
541 – 0975 – 7
6
18.0
12.5
DF1E –07RS/P–2.5(**)
541 – 0976 – 0
7
20.5
15.0
DF1E –08RS/P–2.5(**)
541 – 0977 – 2
8
23.0
17.5
DF1E –09RS/P–2.5(**)
541 – 0978 – 5
9
25.5
20.0
DF1E –10RS/P–2.5(**)
541 – 0979 – 8
10
28.0
22.5
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 to 4 contacts contain socket and plug fixed holes at both ends.
* This retainer can be used together with the socket and relay plug.
B126
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet DF1E-2S-2.5C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DF1E-2S-2.5C | 2.5mm Pitch Connector for Full Lock and Discrete Wire Connection | Hirose Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |